-
Moroccan Air Forces
- Aircraft NDI Technician
2006 - 2015
* Methods:
* Eddy current Testing "ET" (1880 Hours of practical). ;
* Ultrasonic Testing "UT" (430 Hours of practical). ;
* Liquid Penetrant Testing "PT" (1930 Hours of practical)
including methods "D" and "C".
* Magnetic particle Testing "MT"(680 Hours of practical). ;
* Radiography testing "RT" (260 Hours of practical) ;
* Aircraft types : T-6C, T-37B, T-34C and F-16
* Tasks and Responsibilities:
* NDT shop leader. ;
* Have the skills and knowlege to process parts and
preformed equipement standardization, carried out
any necessary preparation of part, set up and calibrate
equipement, read and interpret indications, determine
whether part is acceptable/rejectable, and write a written
instruction.
* Performed inspection techniques such as defect
type/location, conductivity measurement,
thickness/corrosion measurement and thickness
measurement of nonconductive coating.
-
Moroccan Air Force
- Aircraft Maintenance Airframe and Hydraulic SystemTechnician
1994 - 2012
* Aircraft Maintenance Technician (Airframe and Hydraulic
* Duties and Responsibilities:
* Team leader in flight line (4 years). ;
* Team leader during phases inspection in hangar (6 years). ;
* Performed work line maintenance and hangar maintenance
on aircraft including functional checks, periodic, phase,
preflight, thru-flight, postflight, calendar, and special
inspections.
* Inspect general Aircraft systems including, Airframes,
Hydraulic, Fuel and Flight controls systems.
* Checking and servicing hydraulics and oil systems. ;
* Performed fueling and defueling. ;
* Troubleshoot, removed and replaced malfunctiond
components and parts in accordance with applicable technical
data and regulations.
* Performed Rigging and Operation check of landing gear
systems and flight control systems.
* Performed scheduled and unscheduled inspections. ;
* Operate ground support equipement such as jacks, nitrogen
and oxygen servicing equipement.
* Observe all safety regulations and wear PPE as required. ;
* Have the skills and knowledge to read and interpret
maintenance manuals and Service bulletins/Instructions to
determine the method of repairing, replacing, adjusting, and
inspecting aircraft parts.
* Instructed and assigned maintenance tasks to lower graded
mechanics.
* Aircraft types :
* Fighter: F-5
* Turbo-jet: T-37B
* Turbo-propeller: T-34C and T-6C
* Helicopter: AB205
Une expérience absente ?
Vous avez travaillé avec Boujemaa dans une entreprise qui n'apparaît pas dans son parcours ?
N'hésitez pas à lui suggérer d'ajouter cette expérience en lui envoyant un message.
Pour cela ajoutez d'abord Boujemaa à vos contacts.
Ajouter
