Menu

Frédéric CUDEIRO

Paris La Defense

En résumé

Commissioning Engineer, with a background in nuclear reactor operator training and oil & gas engineering.

Mes compétences :
Training
Testing
Rigid pipelines engineering
Nuclear engineering
Management
Ingénierie pédagogique
Commissioning

Entreprises

  • AREVA NP - Overall Test Engineer

    Paris La Defense 2017 - maintenant Writing and review of commissioning test programs and test procedures.

    Support to field-test engineers.

    Training of field-test engineers on simulator.

  • Areva NP - Commissioning Engineer

    2016 - 2017 Olkiluoto 3 (OL3) construction site, Finland

    System leader for the commissioning of the principal secondary circuit of the future EPR plant:
    - Main feedwater system,
    - Emergency feedwater system,
    - Steam Generator blowdown system,
    - Steam dump to atmosphere system.

    Support to the system leader for commissioning of the safety injection system.

  • Areva NP - Ingénieur Conduite d'Essais (Field-Test Engineer)

    2013 - 2017 Field-testing in the very regulated framework of nuclear energy production: security, quality and safety!

    This position requires availability, solid scheduling and preparation, resilience, stress resistance and ability to make quickly good decisions, always following procedures and safety rules.

    Additionally, as an on-site representative of AREVA, customer relationship forms a significant part of the job.

    My scope includes regulatory tests, but also tests after modernization or 'big parts' replacement (e.g. steam generators replacement).

    Some tests (e.g. main circuit hydraulic test) involve the coordination of different working sectors, including mechanics, electrical technicians or other field-test engineers.

  • EDF SA - Ingénieur Confirmé responsable du Circuit Secondaire Principal (Senior Secondary Circuit Engineer)

    Paris 2013 - 2013 Technical documentation review.

    Technical support to nuclear installed base.

  • EDF SA - Formateur-Concepteur Conduite Nucléaire (Reactor Operator Instructor)

    Paris 2009 - 2012 As a nuclear reactor operator instructor, first I followed the same training course as a licensed nuclear reactor operator (18 months with theoretical and practical exams), as well as additional pedagogy and interview techniques course.

    Once licensed as an instructor, my scope covered both theoretical and practical trainings, with simulation of various scenarios on a 'full-scope' simulator which reproduces identically a nuclear reactor control room.

    I was in particular repsonsible for:
    Initial training of future nuclear reactor operators, safety engineers and control room supervisors, including normal, incidental and accidental operations.

    Training and skill development of senior reactors operators and control room supervisors, with:
    - more complex scenarios with accumulation of hardware failures and human error,
    - teamwork assessment and improvement,
    - deeper approach of human factors.

  • Technip - Rigid Pipeline Engineer (internship)

    Paris 2009 - 2009 R&D in the framework of Flow Assurance and Integrity Management issues [...].

    I went beyond the original scope of my internship and produced two 'decision matrices' which - combined with statical and economical data - might help choosing the most strategic techniques to invest in.

  • Supersonic Imagine - Mechanical Engineer (internship)

    Aix-en-Provence 2008 - 2008 Original scope of the internship was to help the lead mechanical engineer to design the cooling system of Supersonic Imagine's innovative ultrasound system, the Aixplorer.

    When I began my internship, the company was working on a first design.
    I proposed an alternative design, which helped to reduce cost and make maintenance easier..
    I built a test bench to demonstrate the relevance of my solution and to optimize airflow.

    This cooling system is currently used by the Aixplorer.

  • CNRS - Mechanical Engineer (internship)

    Paris 2006 - 2006 Design of a mechanical system (a water tank with a three-axis motorized system).

    Supervision of the fabrication, assembly and testing.

    The system was successfully used for 3D ultrasound elastography experiments.

Formations

  • Ecole Catholique Des Arts Et Métiers (Lyon)

    Lyon 2003 - 2009

  • ECAM Lyon

    Lyon 2000 - 2009 Engineer

Réseau

Annuaire des membres :