Menu

Kamel MAGA

BLIDA

En résumé

« Les idées ne sont pas faites pour être pensées mais pour être vécues »

More than five (07) years experience in Engineering work, Monitors and inspects a variety of facility installations to ensure compliance with project documents, including minor and major RCC structure, Building Architectural works, Asphalt roads/pavement, Cable/Pipe trenches, storm water drainage system, Site preparation/Earth works, Tank foundations, Sumps/Pits, Grouting works and Structural steel erection works and other associated materials used throughout civil construction works.
Monitor quality control activities to ensure conformance to QA/QC requirements, specified procedures and all items of construction work complies with drawings, standards and project specifications. Verify that all inspection and test required have been completed and rated acceptable. Perform inspection survey for materials as per approved purchase order, material data sheet and specification requirement. Ensure final completion, conduct final inspection, prepare punch list and verify completion of punch items.

Mes compétences :
Microsoft Office
Autodesk Revit
Autocad
ArchiCAD
Planification
Coordination technique
Suivi de chantiers
Controle de qualité

Entreprises

  • JGC Corporation - QC Inspector Civil & Building

    2017 - maintenant Duties and Responsibilities (but not limited to):
     Monitor quality control activities to ensure conformance to QA/QC requirements
     Reviews the drawings and designs for civil/Building and fit out works and proposes changes as required along with appropriate comments/ justifications coordinating the same with concern owner fit out representative. 
    Verify that all inspection and test required have been completed and rated acceptable.
     Ensure final completion, Handover and release between discipline.
  • CPECC (China Petroleum Engineering & Construction Corporation) - QA/QC Civil Engineer

    2017 - 2017 Duties and Responsibilities (but not limited to):
     Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI...
     Monitor quality control activities to ensure conformance to QA/QC requirements, specified procedures and all items of construction work complies with drawings, standards and project specifications.
     Verify that all inspection and test required have been completed and rated acceptable.
  • Petrofac UAE LLC - QC Building Inspector

    2016 - 2017 Duties and Responsibilities (but not limited to):
     Quality control inspection of all type of Concrete works, earth works building architectural works, grouting works, underground services and structural steel works in line with approves ITP’s.
     Inspection of heavy equipment foundations such as horizontal and vertical vessels, exchangers, Building foundations, Turbine, Boiler, Compressor foundations and all type of support foundation (pipe support, cable tray support and miscellaneous support).
     Monitor area excavation back filling and compaction, this includes works related to cable trenches/pipe trenches and layer by layer sand bedding.
     Witness all type of tests related to civil & architectural works.
     Ensure protection of concrete (curing) below and underground concrete protective works.
     Random check using surveying equipments to verify vertical and horizontal alignment,
    location of structure, elevation of pipe and other utilities, verifies placement of reinforced steel, embedded items, concrete quality and placement of form work.
     Inspect culverts, roads, conduits, plumbing, sewage, sumps and evaporation pond works.
     Measure dimensions and verify level, alignment and elevations structures and fixtures to ensure compliance to building plan and code.
  • Electrolux Professional SPA - Architecte Chef de Projet

    2015 - 2016 Duties and Responsibilities (but not limited to):
     Ensure a project management for installation of professional kitchen & laundry equipments start from the planning to the commissioning includes: design, manufacturing, supply, installation, startup, training for use, after-sales service.
     Quality control inspection of the areas before start installation as per the requirements of
    each equipment (finishing works, MEP works…etc).
     Check using surveying equipments to verify the dimensions on site and compared with the drawings to anticipate any modification required.
     Monitoring several subcontractors.
  • CSSI-Camp Support Services Integrated - Ingénieur de bureau Technique

    2013 - 2014 Projet: IN SALAH GAS - SOUTHERN FIELDS - IS BDV, IS MILITARY CAMP, IS CPF CONTROL BUILDING , REG BDV EXTENSION EPC (Engineering, Procurement and Construction)
    *Maître d'ouvrage: Groupe ISG (SONATRACH, STATOIL, BP)
    *Contractant : PETROFAC .
    *Sou-traitant: CSSI FRANCE / CSSI ALGERIA
    *Consultant: DAR AL HANDASAH
    Descriptif du poste et différentes missions:
    Ingénieur de bureau Technique.
    En communication direct avec le bureau d'ingénierie du client :
    *Préparation des sketchs des Modifications établi sur site.
    *Coordination entre le site et les bureaux de liaison (Alger, France, Egypte).
    *Demande d'approbation et suivi des fiches technique. (Matériaux, pompes, fournitures, appareillages)
    * Responsable des plans de récolement (As-Built) de tout le projet.
  • CSSI-Camp Support Services Integrated - Ingénieur de site

    2012 - 2013 Projet: IN SALAH GAS - SOUTHERN FIELDS - IS BDV, IS MILITARY CAMP, IS CPF CONTROL BUILDING , REG BDV EXTENSION EPC (Engineering, Procurement and Construction)
    *Maître d'ouvrage: Groupe ISG (SONATRACH, STATOIL, BP)
    *Contractant : PETROFAC .
    *Sou-traitant: CSSI FRANCE / CSSI ALGERIA
    *Consultant: DAR AL HANDASAH
    Descriptif du poste et différentes missions:
    : Architecte Ingénieur de site
    Responsable d'un site inclue Bâtiment de contrôle, Poste de Garde et Abri pour véhicules.
    *Respect des procédures HSE.
    *Suivi des travaux.
    *Gestion des sous-traitants.
    *Coordination entre les différente discipline (Instrumentation & Télécom, HVAC, Plomberie ...etc.)
    *Rapports.
    *Participation aux réunions avec le client.
    *Demande d'inspection.
    *Coordination avec le département qualité (procédures, method statement ...etc.)
    *Coordination avec le bureau technique.
    *Coordination avec l'approvisionnement. ;
  • CSSI-Camp Support Services Integrated - Architecte d'étude

    2012 - 2012 Projet: IN SALAH GAS - SOUTHERN FIELDS - IS BDV, IS MILITARY CAMP, IS CPF CONTROL BUILDING , REG BDV EXTENSION EPC (Engineering, Procurement and Construction)
    *Maître d'ouvrage: Groupe ISG (SONATRACH, STATOIL, BP)
    *Contractant : PETROFAC .
    *Sou-traitant: CSSI FRANCE / CSSI ALGERIA
    *Consultant: DAR AL HANDASAH
    Descriptif du poste et différentes missions:
    Architecte d'étude:
    *Révision des plans.
    *Préparation des nomenclatures du projet.
    *Responsable des plans de récolement (As-Built) de Cinq bases de vie temporaire (deux missions
    effectué sur le site In Salah).
  • BET AGGOUNE - Architecte Sou-traitant

    2011 - 2012 Descriptif du poste et différentes missions :
    * Relevée sur terrain.
    *Dessin 2D et 3D avec les rendues.
    *Suivi des travaux sur chantier.
    *Négociations avec le maitre d'ouvrage et les entreprises de réalisation.
  • JD’AI Architecture Algérie SPA - Architecte

    2010 - 2011 Descriptif du poste et différentes missions :
    *Responsable d'étude des différentes projets.
    *Relevée sur terrain.
    *Dessin 2D et 3D.
    *Coordination avec le bureau principale en France.
    *Rapports.
    *Assistance et motivation des stagiaires.
  • JD’AI Architecture Algérie SPA - Aide Architecte 3 jours par semaine (en parallèle avec la préparation du diplôme)

    2008 - 2010 Descriptif du poste et différentes missions : Selon l'emploi du temps d'étude plus les weekends :
    *Dessin des esquisses préparé par les architectes 2D & 3D.
    *Relevée sur terrain.
    *Preparation des presentation pour les client.
    *Rapports.

Formations

  • PETROFAC TRAINING CENTER (Reggane)

    Reggane 2016 - 2016 Perfectionnement

    HSSE Induction
    Working at height
    Permit to work
    Commissioning Induction
    Loto Commissioning
  • Electrolux Professional Spa Factory (Pordenone)

    Pordenone 2015 - 2015 Perfectionnement

    Installations of professional equipments for kitchen & laundry
  • PETROFAC TRAINING CENTER (In Salah)

    In Salah 2012 - 2014 Perfectionnement

    General Environmental Awareness / Février 2014 (4 hours)
    Supervisors Training / Juillier 2014 (4 hours)
    Accident Investigation & Reporting / November 2013 (4 hours)
    HSSE Site Induction / Juin 2013 (8 hours)
    First Aid / Juin 2013 (8 hours)
    Permit to Work / September 2012 (8 hours)
    Working at height / September 2012 (4 hours)
  • Ecole CiviSoft Algérie – BLIDA (Blida)

    Blida 2010 - 2010 Certificat Revit Architecture
  • Université Saad Dahlab De Blida (Blida)

    Blida 2009 - 2010 Architecte
  • Lycée Technique (Blida)

    Blida 1999 - 2000 Bac Génie Civil

    Branche Génie Civile

Réseau

Annuaire des membres :