Mejri AHMED

En résumé

Entreprises

• sicim - Piping engineer

  2015 - maintenant • Definition of equipment needs (Piping, valves, instruments ...).
  • Verification of conformity of the equipment according to ASME.
  • Preparation of various construction procedures detailing the phasing of various works by the norms and standards required by the customer.
  • Supervision of piping work on site coordination and management of the various subcontractors involved in the construction.
  • Coordination of construction on land between the various trades as area manager on site.
  • Study of changes necessary (as-built) on site and / or requested by the client in developing detailed studies on site, as well as changing the schedule.
  • Attend daily and weekly on-site with the client and subcontractors meetings to analyze the status of the progress and update schedule.
  • Document Verification Test Pack.
  • Piping prefabrication and installation inspection.
  • Punch-List and set a day reports.
  • Verification of conformity.
  • Assist the construction site.
  • Coordination with the HSE and the team of quality control.
  • Supervision of painting, color coding and insulation.
  

• MEDSERVICES - PIPING Engineer

  2012 - 2015 MEDSERVICES: (PIPING Engineer, TEKLA& PDMS Designer)
  Project: Scale structure with access to RBT4 and RBT6, RB7 gateway to access valve.
  
  Client: Boscongo
  
  Principal tasks:
  
  * Configuration of the project.
  * Creation of catalogs and specifications.
  * Modeling of structures. ;
  * Extract of Shop Dwg - Assembly, Shop Dwg - Marks, MTO from model.
  
  Environment: AutoCAD, TEKLA.
  Project: GTCPP
  
  Client: RENCO
  
  Principal tasks:
  
  * Configuration of the project.
  * Creation of catalogs and specifications. ;
  * Modeling of equipment, piping and structures. ;
  * Extract of isometric from model. ;
  * Check and correct the pipes up, sizing and positioning.
  * Coordination with the team of stress for the installation of supports.
  
  Environment: MS Office, AutoCAD, Navis works, Aveva Pdms.
  Interface Equipment/piping: Tank, Vessel, Heat exchanger, Pump, Column, Flare, Firefighting equipment.
  
  Project: CENTRALE COMPRESSIONE HERA LACINIA
  
  Client: RENCO
  
  Principal tasks:
  
  * Configuration of the project.
  * Creation of catalogs and specifications. ;
  * Modeling of equipment, piping and structures. ;
  * Extract of isometric from model. ;
  * Check and correct the pipes up, sizing and positioning.
  * Coordination with the team of stress for the installation of supports.
  
  Environment: MS Office, AutoCAD, Navis works, Aveva Pdms.
  Interface Equipment/piping: Tank, Vessel, Heat exchanger, Pump, Column, Flare, Firefighting equipment.
  
  Project: SUPPLY AND INSTALLATION OF AIR COMPRESSOR STATION
  
  Client: ARABIAN GULF OIL&CO
  
  Principal tasks:
  
  * Configuration of the project.
  * Creation of catalogs and specifications. ;
  * modeling of equipment, piping and structures. ;
  * Extract from the isometric model. ;
  * Check and correct the pipes up, sizing and positioning.
  * Coordination with the team of stress for the installation of supports.
  
  Environment: MS Office, AutoCAD, Navisworks, Aveva Pdms.
  Interface Equipment/piping: Tank, Vessel, Heat exchanger, Pump, Column, Flare, Firefighting equipment.
  
  
  
  Project: WEST FRANKLIN PROJECT- NORTH SEA
  
  Client: ROSETTI MARINO/Total E&P UK
  
  * Configuration of the project.
  * Generate AutoCAD drawings using SpoolGen.
  * Checking welds.
  * Provide technical support to the auditor.
  * Verification of Customer specifications.
  * Check equipment.
  
  Environment: MS Office, AutoCAD, Spoolgen.
  Interface Equipment/piping: Tank, Vessel, Heat exchanger, Pump, Column, and Flare.

• ENI - TEST PACK Supervisor

  Lyon 2011 - 2012 Project: CPF MENZEL LEDJMET EAST PROJECT BLOCK 405B, ALGERIA
  
  Client: ENI (First Calgary Petroleums) SONATRACH
  
  Principal tasks:
  
  * Preparation, monitoring and management teams of welders and fitters.
  * Definition of equipment needs (Piping, valves, instruments ...).
  * Verification of conformity of the equipment according to ASME.
  * Preparation of various construction procedures detailing the phasing of various works by the norms and standards required by the customer.
  * Supervision of piping work on site coordination and management of the various subcontractors involved in the construction.
  * Coordination of construction on land between the various trades as area manager on site.
  * Study of changes necessary (as-built) on site and / or requested by the client in developing detailed studies on site, as well as changing the schedule.
  * Attend daily and weekly on-site with the client and subcontractors meetings to analyze the status of the progress and update schedule.
  * Document Verification Test Pack. ;
  * Piping prefabrication and installation inspection. ;
  * Mechanical inspection with the client.
  * Punch-List and set a day reports.
  * Verification of conformity.
  * Assist the construction site.
  * Coordination with subcontractors. ;
  * Verification testing hydraulic equipment and instruments.
  * Execution and supervision of hydraulic and pneumatic tests.
  * Coordination with the HSE and the team of quality control.
  * Supervision of painting, color coding and insulation.

• MEDSERVICES - TEST PACK Engineer & PDMS Designer

  2010 - 2011 Project: Ticona, Neste oil, Erup
  
  Principal tasks:
  
  * Preparation of documents test pack. ;
  * Preparation of limits for test pack according to ASME and client. ;
  * Check for system limitations and services to PI & D. ;
  * Checking isometric.
  
  Environment: MS Office, AutoCAD, Navisworks.
  Interface Equipment/piping: Tank, Vessel, Heat exchanger, Pump, Column, and Flare.

Formations

• National Institute Of Applied Sciences And Technologies (INSAT) (Tunis)

  Tunis 2004 - 2010 Diploma
  
  Sciences and Technology INSAT.

• National Institute Of Applied Sciences And Technology (Tunis)

  Tunis 2004 - 2010 Diploma
  
  Technical Knowledge
  * PDMS
  * Naviswork
  * SPOOLGEN
  * AutoCAd
  * Tekla Structures
  
  
  Engineering skills

Réseau

• Chaker BENAYA

• Firas HORRI

• Massoudi NIZAR

• Nizar AYARI

• Omar FOUGHALI

• Philippe HABERSCHILL

• Roukaya ARFAOUI

• Taoufik ESSOUDA

• Tesnim KRAIEM

• Tinno Bang MBANG