Philippe KOEBERLE

En résumé

Entreprises

• Safran - Electrical Engineer

  Paris 2014 - 2014 Consultant at PM OPTIMA Sàrl - Luxembourg
  ------
  
  LEAP-X project (intended to be a successor to the CFM56-5B and CFM56-7B).
  ----
  The need is to upgrade three test cells based in Belgium and Poland.
  
  Realisations/ Activities :
  Designing and sizing the electrical power part on each test cell ;
  Sizing instrumentation and power cabinets/boxes on each test cell ;
  Writing technical specifications about erection of each cabinet/box.
  
  Results:
  Cabinets and boxes are at the moment in erection.

• APCO Technologies - Electrical engineer in Nuclear and US machiney Dep.

  2014 - maintenant

• CTI SYSTEMS - Electrical Engineer

  2013 - 2014 Consultant at PM OPTIMA Sàrl - Luxembourg
  ------
  
  ~*~Bombardier – Canada: The final customer ordered special elevating platforms (authorised in U.S. hazardous location) to paint it aircrafts.
  
  • Writing technical specifications about different kinds of remote control in class 1 Division 1 (HazLoc) ;
  • Benchmarking on US products (UL-CSA) ;
  • Designing and sizing the electrical part (NFPA norms /E PLAN P8).
  
  ~*~Airbus – Germany: The final customer ordered an automatic conveyor to load and unload the Beluga aircraft in automatic mode.
  
  • Auditor and advisor on automation, electrical part and Safety Integrity Level (SIL);
  • Sizing cables and apparatus through each consumer (Simaris).
  
  ~*~Turkish Airlines – Turkey: The final customer ordered maintenance docks for different kinds of aircraft, including having power supply on each dock part.
  
  • Writing technical specifications about normal and Ɛx :
  • Lights ;
  • Plugs / sockets ;
  • Drives.
  • Designing and sizing the electrical part (European norms/E PLAN P8) ;
  • Designing drives and frequency converter with wiring control/command and safety ;
  • Sizing the Safety Integrity Level (SIL) on the whole project.
  
  ~*~Paul Wurth – China: The final customer ordered a conveyor system which is able to move train bogies in different areas.
  
  • Designing and sizing the electrical part (European norms/E PLAN P8) ;
  • Sizing the Safety Integrity Level (SIL) on the project ;
  • Monitoring erection in workshop.

• Cofely Fabricom GDF SUEZ - Electrical Engineer

  2012 - 2013 Conclusion of contract with V.I.E (Volontariat International en Entreprise), I brought my services to Cofely Fabricom GDF SUEZ as Electrical Engineering and P.I.D engineering too.
  Consultant at Ubifrance and MCA Benelux - France / Belgium
  ------
  
  ~*~SCA Hygiene Products SA – Belgium: Revamping of Low Voltage Main Board and Motor Control Center.
  
  • Analysis and audit of the actual system on site ;
  • Writing technical specification to revamp (Customer point of view) ;
  • Creation and set up a template of technical specification for electrical revamping.
  
  ~*~GlaxokSmithKline – Belgium: pharmaceutical projects.
  
  • Designing and sizing the electrical part (European norms/Belgian norms/E PLAN P8).
  
  ~*~Cabot Plastic Belgium - Belgium: Revamping of Motor Control Center.
  
  • Analysis and audit of the actual system on site ;
  • Writing technical specification to revamp (Customer point of view) ;
  • Designing and sizing the electrical part (European norms/Belgian norms/E PLAN P8).
  
  ~*~Electrabel Tihange - Belgium: Design of ultimate safety electrical power units for the nuclear plant in Tihange.
  
  • Designing and sizing the electrical part (European norms/Belgian norms/E PLAN P8) ;
  • Monitoring erection in workshop.
  
  ~*~Electrabel Tihange - Belgium: Supplies inverter to the secondary cooling system.
  
  • Designing and sizing the electrical part (European norms/Belgian norms/E PLAN P8) ;
  • Monitoring erection in workshop.

• ThyssenKrupp Presta France SAS - Lead Electrical Engineer

  Saint Barthélemy d'Anjou 2009 - 2012 Accomplished with a work-study program
  
  Project concerning the ageing of machine park - Head of retrofit project
  
  Summary and objectives of project :
  - Reliability of the park machine - Cutback of M.T.B.F
  - Standardisation of obsolete electrical equipment - Cost reduction of storage and modernisation of equipment.
  
  Works accomplished :
  - Improvement, expansion and realization of retrofit
  - Electrical design and automation (motor and drive Bosch Rexroth)
  - Planning and costing of technical solutions
  - Preparation of technical specifications
  - Deployment of internal and external resources (Subcontractor)
  - Risk analysis of project
  - Risk analysis of machinery (EN13849 - EN12100 - EN62061)
  - Electrical study
  - Automation study
  - Program study
  - Fitter and cable-man
  - Monitoring of sub-contractor assembling
  - Management of assembly and mechanical conception
  - Putting into service of the electrical axe Bosch Rexroth
  - Customer commissioning
  
  Deliverable/Results :
  - Deadline respected, long term cost effective
  - Expansion and installation, (4 months after development)
  
  Developed skills:
  - Method of problems solving D.M.A.I.C
  - Respect of Golden triangle (Cost Time Quality)
  
  
  Retrofit on measuring station : Friction and radial pulsing of steering column
  March 2011 – May 2012
  - Functional analysis
  - Costing and planning of technical solutions
  - Standardisation of equipment and technical requirement of the company
  - Hardware study
  - Program study
  - Parameters of speed variable drive
  - Test and trials
  - Putting into service
  
  
  
  Retrofit on measuring station : axial clearance of steering column
  May 2012 – August 2012
  - Functional analysis
  - Costing and planning of technical solutions
  - Standardisation of equipment and technical requirement of company
  - Hardware study
  - Program study
  - Parameters of speed variable drive
  - Test and trials
  - Putting into service
  - Feedback on the project to create a white paper concerning standard integration of equipment
  

• LyondellBasell - Electrical Technician

  Berre l'etang 2007 - 2009 Accoplished with a work-study program
  
  Shell Pétrochimie Méditerranée
  July 2007 – August 2009 (2 years 2 months)|13130 - Berre l'Etang
  Electrical technician for maintenance and production
  
  Summary and objectives of project :
  - Improvement of electrical control of an overhead conveyor
  - Renovation of the overhead conveyor system to cutback M.T.B.F during the maintenance of air compressors
  
  Works accomplished :
  - Expansion and realisation of the control (Altivar Schneider Electric)
  - Planning and costing of technical solutions
  - Preparation of technical specifications
  - Deployment of internal and external resources (Subcontractor)
  
  Deliverables/Results:
  - Deadline respected, long term cost effective
  
  Future task action :
  - Preparation of an action plan until allocated budget
  
  Developed skills :
  - Development of costing, planning and resources management
  - Management project
  - Respect of Golden triangle (Cost Time Quality)
  - Long-term depreciation of project cost
  

• Arcelor Mittal - Machine operator in shift work

  2007 - 2007 Transport of steel bar according to the needs of supply chain conveyor

Formations

• Université Technologique De Belfort Montbéliard (UTBM)

  Belfort 2009 - 2012 Electrical Engineering with a work-study program
  
  Electrical, Electronics and Communications Engineering

• CFAI Provence (Istres)

  Istres 2007 - 2009 Electrical technician with a work-study program
  
  Electrical and Power Transmission Installation/Installer