Ahmed KABOUB

En résumé

Entreprises

• ALSTOM GRID Service - Senior Tendering Engineer

  2008 - maintenant
  * Senior Tendering & Sales Engineer responsible for looking on new opportunities,
  preparing technical & commercial offers and following up & negotiation with
  customers to get the order*
  *
  Main projects:*
  *
  1- Long term maintenance contract for the maintenance of 400kV/300kV &132kV GIS
  Substations at Kuwait: Total number of 54 GIS substation
  2- Refurbishment of protection relays for 16 bays at 132kV substation (busbar
  protection relay, Transformer protection relays, feeder protection relay)
  3- Commissioning of Al Zour 400kV GIS Substation (Kuwait)
  4- Commissioning of SAAD Alabdullah 400kV GIS Substation (Kuwait).
  5- Repair of 300MVA transformer (Replacement of all windings at turkey factory)
  6- Upgrade of protection system at Al-Zour 275kV power generation
  7- Design & installation of cooling fans for 75MVA & 30MVA power transformers *
  *
  Duties & responsibility includes: *
  
  1-Estimation using an accurate software: "computer-aided-project-cost-estimating
  system''
  2-Planning.
  3-Bid preparation.
  4-Searching new opportunities.
  5- Coordination and technical discussions with clients.
  6-Subcontractor and vendor negotiations.
  7- Finalizing subcontract agreements.
  8- Coordination with different discipline subcontractors.
  9- Preparation of preliminary design of installation as per client's requirements. *

• Alstom Grid - Senior tendering engineer

  2008 - maintenant - Préparation des offres technico-commerciaux
  - Estimation des cout, négociation avec les clients
  - Développement plant

• AGIP International - Project engineer

  2007 - 2008 : AGIP International,
  charge for engineering & construction work for the following
  projects:*
  *
  1- Construction & commissioning of Three 33/6.6kV substations, and the installation
  of 6.6kV multiphase pumps rated 5MW*
  2- 60kV overhead distribution line feeding CTS ROM (Algeria)
  3- Construction of 60kV overhead line *
  
  *
  *
  *
  
  Missions:*
  
  1- Review tender documents, scope of work and specifications
  2- Member of engineering team charged for detailed engineering work.
  3- Preparation of material list and equipment requisitions related to the
  project.
  4- Evaluation of vendor's technical and commercial proposals, and providing
  recommendations
  5- Checking supplier's documents and providing comments.
  6- Supervision of the construction activities and ensure they are in
  accordance with project specifications.
  7- Planning
  8- Preparation of the method of statement during the commissioning phase
  9- Coordination with subcontractors
  10- Preparation of the hand over file, and start up documents
  11- Preparation of Red mark & As built drawings*

• BECHTEL International Co - Field Engineer

  2006 - 2007
  Missions:
  1- Conduct a site survey and determination of the required material.
  2- Coordination and technical discussions with client.
  3- Subcontractor and vendor negotiations.
  4- Finalizing subcontract agreements.
  5- Coordination with different discipline subcontractors.
  6- Preparation of drawings, data sheets, Quality Assurance Plan, etc.
  7- Obtaining approvals from client.
  8- Material procurement from client approved vendor list.
  9- Supervision of site activities and site co-ordination.
  10- Testing, commissioning and handing over.
  11- Preparing and submitting As-Built drawings.*

• BECHTEL International Co - Design Engineer

  2005 - 2006 member of team working in Huston ofice (USA) incharge for design of the extension of SONAHESS petroleum facilities*
  *
  The project consists of: GAS compression, injection & re-injection facilities. *
  *
  The electrical part of the project includes but not limited to:*
  *
  1- Design & erection of electrical Power station to feed critical petroleum facilities at
  Hassi-Messaoud area (4 GE generators each generator rated 25MVA)*
  2- Design & erection 7 outdoor switchyard (66KV) & various substations (33/11/5kV)*
  3- Design & erection of 66kV overhead line *
  4- Installation of power management system & SCADA to monitor the electrical
  network *
  5- Cathodic protection*
  6- SCADA system*
  7- Power management system to monitor the electrical network feeding SONAHESS
  facilities*
  8- installation of 5.5kV Motors & VFDs*
  **
  **
  * *

Formations

• ALSTOM Institute (Dubai)

  Dubai 2011 - 2011 management

• ALSTOM Institute (Kuwait City)

  Kuwait City 2011 - 2011 HSE procedures in electrical substation (training)

• ALSTOM Institute (Dubai)

  Dubai 2009 - 2009 Proposal & tendering management training

• Université Des Sciences Et De La Technologie Houari Boumediène USTHB (Alger)

  Alger 2000 - 2004 ingenierie electrotechnique

• University Of Science And Technology (Alger)

  Alger 1999 - 2004 Bachelor of Engineering in Electrical and Electronics Engineering (Electro-Technique option)
  
  : University of Science & technology Houari Boumedien *
  * ;
  * Bachelor of Engineering in Electrical and Electronics Engineering (Electro-Technique
  option)*
  *

Réseau

• Jean Michel RIVIERE

• Louis NIVELLEAU

• Mehdi ZMIRLI

• Salah B.SALAH

• Taieb BELAJOUZA

• Tarek MEHIRI