Bouzid SAAOUI

En résumé

Entreprises

• Group- SH - MAINTENANCE & EXPLOITATION SUPERVISOR & Mechanical project engineer

  2014 - 2014 * Mechanical project engineer in charge of inspection, control of all mechanical activities ;
  * Perform preventive and corrective maintenance ;
  * Leveling and Alignment of equipments ;
  * Review of vendor drawings and documents ;

• ENGTP - Construction / MECHANICAL SUPERVISOR

  2014 - 2014 * Transport gas 24'' REG to ICP
  * Work Shop Prefabrication Supervision
  * Preparation of work packs for hydro testing ;
  * Monitoring piping tests
  * Checking reinstatements of lines
  * Preparation of work packs for hydro testing
  * Assistance hydro test with QA/QC
  * Review of foundation acceptance report ;
  * Centre line marking on equipment & foundation ;
  * Level of foundation (Padding, shims / packing with marking to be prepared & kept ready) ;
  * Correctness of no.& size of foundation bolts ;
  * Matching equipment base bolt holes with actual foundation bolt layout ;
  * Marking orientation ;
  * Checking the threads of bolt & nuts
  * Review of rigging procedure ;
  * Placement of packing as per DWG
  * Orientation of equipment as per DWG
  * Tightening of bolts and Providing washers
  * Final tightening of bolts
  * Grouting
  * Final tightening of bolts ;

• Group - Sonatrach - Construction / MECHANICAL SUPERVISOR & Mechanical project engineer

  2013 - 2014 * Mechanical project engineer in charge of inspection, control of all mechanical activities
  * I have experience in Mechanical Field Service rotating And Static equipments
  * Alignment method, the comparator (radial & face) ;
  * Alignment of rotating equipment like (pumps, compressors, vessels, fans.), spares requirement ;
  * Perform preventive and corrective maintenance ;
  * Hands on in overhaul of vertical and horizontal pumps and commissioning of units into service ;
  * Supervision of Work Shop Prefabrication
  * Follow up and resolve punch list
  * Checking reinstatements of lines ;
  * Monitoring piping and supports construction ;
  * Monitoring piping tests ;
  * Supervisions of excavation / erection pipe for road crossing / coating / pinhole test and ;
  * Backfilling ;

• ENGTP - Construction / MECHANICAL SUPERVISOR & Mechanical project engineer

  2010 - 2013 * - Mechanical project engineer in charge of inspection, control of all mechanical activities ;
  * Leveling and Alignments of equipment ;
  * Checking reinstatements of lines
  * Monitoring piping tests ;
  * Make substitution of material if it's possible ;
  * Supervision of work ;
  * Monitoring piping and supports construction ;
  * Supervisions of excavation / erection pipe for road crossing / coating / pinhole test and backfilling ;
  * Follow up and resolve punch list
  * Assistance hydro test with QA/QC
  * Preparation of work packs for hydro testing ;
  * Checking reinstatements of lines ;

• Group - Saipem - Construction / MECHANICAL SUPERVISOR & Mechanical project engineer

  2009 - 2010 * Mechanical project engineer in charge of inspection, control of all mechanical activities ;
  * Leveling and Alignments of equipment ;
  * Supervisions and construction of piping and supports ;
  * Monitoring of all pipe repair inside CPF or off side ;
  * Shut down work backs Preparation ;
  * Work permits and risk assessment Preparation ;
  * Follow-up and participation Shut down ;
  * Request UT Measurements for pipe to be repaired ;
  * Follow-up and control works for Hook up progress ;
  * Raise Technical Query / Site Inspection Report regarding anomalies
  * Follow-up and participation at all piping repair Oil / Gas / Water
  * Request and supervisions of Hot Tapping operations with Hot Tap machine
  * Raise primary punch list (work under construction) before QA/QC Punch list
  * Monitoring piping and supports construction ;
  * Follow up and resolve punch list
  * Preparation of work packs for hydro testing
  * Assistance hydro test with QA/QC
  * Checking reinstatements of lines
  * Monitoring piping tests
  * Making As-built ;
  * Make substitution of material if it is possible ;

• ENGTP - Mechanical & Piping Supervisor Engineer

  2008 - 2014 Group

• ENGTP/SONATRACH - PIPING & PIPELINE SUPERVISOR ENGINEER

  2005 - maintenant

• MRE - Hydraulic Engineer

  NANTES 2005 - 2008 Pipeline & Piping with Ministry of water resources
  Job Specification:
  
  * Installation of pumps, vessels, columns, Heater, compressors and turbo-expander ;
  * Flange parallelism of pumps & compressors Rotating Machine installation (turbine, pumps, air cooler exchanger )Positioning, levelling and alignment. ;
  * Vessels, drums, tanks and flare installation
  
  * Self-motivated team player with attention to detail and result oriented
  * Review and approve sub-contractors piping, welding, post weld heat treatment and non destructive examination procedures where necessary.
  * Ensure pipe-fitters are qualified and their certificates are prepared and maintained in accordance with company control procedures
  * Maintain and continuously update the Company Welder Qualification Register
  * Review contract weld repair rates and produce on a monthly basis an analysis of total repairs for the company
  * Ensuring welding instruments for recording parameters are maintained in good condition and are regularly calibrated
  * To maintain and update the register of company welding procedure qualification records
  * To submit on a monthly basis a report summary of outstanding issues to the Company Welding Services Manager
  * To perform welding engineering tasks as directed by the Company Welding Services Manager
  * Providing support to Quality Manager with regards to problems and issues arising throughout the project
  * Delivering support to the Quality team to ensure compliance with project requirements
  * Performing inspection activities including welding, machining and painting
  * Ensuring quality documentation is raised, completed and filed
  * Raising NCR's and expediting resolution including corrective and preventive action verification and closure
  * Liaising with Engineering regarding critical features requiring additional controls
  * Liaising with client and third party personnel to ensure that the project is progressed in line with project requirements
  * Coordinating, expediting and closing TQ's and NCR's, including client and 3rd party involvement
  * Conducting and documenting internal and external audits
  * Preparation of test packages ;
  * Supervise the insulation works ;

Formations

• Algerian Petroleum Institute (Boumerdes)

  Boumerdes 2009 - 2010

• Algerian Petroleum Institute (Boumerdes)

  Boumerdes 2009 - 2010 Engineer
  
  Field: Mechanical
  Branch: Hydrocarbon Transportation Engineering
  (Piping & Pipeline)

• Université Abderrahmane Mira De Béjaïa (Bejaia)

  Bejaia 2000 - 2000 Hydraulic Engineer

• Université Abderrahmane Mira De Béjaïa (Bejaia)

  Bejaia 1998 - 1998 Baccalaureate Degree

• BEJAIA University (Bejaia)

  Bejaia 1998 - 2004 Engineer
  
  Field: Hydraulic Engineering
  Branch: Hydraulic, Mechanical Equipment & Piping

Réseau

• Abdelkader ABDELKADER TABERKOKT (TABERKOKT)

• Ali BOUKHARI

• Eric AUBOURG

• Fergui FARID

• Hanane BEN

• Kadri AMMAR

• Khalil HAMLAT

• Rachid AIDLI

• Vincent THIBOUT