Menu

Chaouki MAISSI

BELFORT CEDEX

En résumé

Mes compétences :
Solidworks
Microsoft Word
Microsoft PowerPoint
Microsoft Excel
Mechanical Engineering
Steam Turbines
Microsoft Windows
site supervision
Sample analysis
Responsible for the daily report production
Microsoft Office
Mechanical Installation
Mechanical Design
Generators
CAD/CAM > CAD

Entreprises

  • GE Energy - Mechanical Supervisor

    BELFORT CEDEX 2017 - maintenant Suivi tous travaux d'installation sur ligne d'arbre ... Turbine à Gaz 9FA, Générateur 324

  • General Electric - Mechanical Supervisor

    Paris 2014 - 2017 Mechanical Supervisor with (GE power & water) Project: Power Plant simple cycle GAS TURBINE 9FA (590.726 MW) in HASSI R'MEL LAGOUAT ALGERIA.
    General responsibilities:
    -Prepare the plan of assembly work on the shaft line
    - Supervised mechanical installation work on site. ;
    - Ensure the work is completed to the required standard. ;
    - Responsible for the daily report production and RMU AS BUILT changes in site. ;
    - Follow the hydrostatic and pneumatic tests. ;
    - Front end mounting systems with the customer. ;
    - Inspection the end of assembly with the customer.
    -Follow up and fix all the mechanical problems (Punish List) of the customer partner after the commissioning of the 9FA turbine.

  • General Electric - Mechanical Supervisor

    Paris 2011 - 2014 Mechanical Supervisor with (GE power & water) Project: Power Plant combined cycle GAS TURBINE 9FB (CCC 1200 MW) in Koudiet Eddraouch ELTRAF ALGERIA.
    * Make sure the follow-up and on-site supervision of the operations of installation and adjustment of new equipment. ;
    * Organize and supervise the operations of installation and mounting of the skids machines and carry out the various adjustments and alignments according to the plans and specifications. ;
    * Mount TG: mechanical mounting of the TG Model 9FB:
    Operation of mechanical mounting.
    Assembly disassembly combustion chamber.
    Steam Valve.
    Skid Gas G025, Gas heater.
    Skid LF/AA (Liquid Fuel/ Air atomizer.
    Skid Gas DLN (Dry Low NOx).

    * TV Mount: the mechanical mounting of the TV model A16. ;
    * Mechanical Work on generator and auxiliaries.

    Quality work:
    * Piping pressure test.
    * Lifting the reservations. ;
    * Make the changes to mounting on plan Red Mark Up (AS BUILT). ;
    * Drawing of the plan by Solidworks...
    * Borescope inspection.
    * Work of Liquid Penetrant Inspection.
    * The putting into service of systems.

    Work of flushing (Flushing):
    Flushing bearing from Gas turbine to Steam turbine (1st phase + 2nd phase).
    Flushing Lube Oil.
    Flushing of the EHC.

    Operation:
    * Production of fuel oil treaty (storage and processing) ;
    * Sample analysis when processing (Parser uses: Spectroil M).

    Maintenance:
    * Maintenance of centrifuges Alfa Laval GT50 of the treatment system of the fuel oil. ;
    * Lubrication, maintenance and routine checks. ;
    * Repair of the equipment (valves, pumps, motors, etc.).
    *
    Training GE:
    * Training 10 days ALFA LAVAL at GE the Koudiet Eddraouch ;
    * Assembly, disassembly and maintenance fuel oil centrifuge slight type GT50 ;
    * Training 03 days LAB SPECTROIL GE the Koudiet Eddraouch ;
    * Work on spectrometer to electric arc analyzer of fuel type M/W-LD.

  • BABCOCK International - Ingénieur mécanique Jr

    2011 - 2011 Superviseur Jr en Montage Mécanique au niveau d'une compagnie étrangère sous traitent (Babcock Montajes Algérie) dans Projet Centrale à Cycle Combiné Koudiet Eddraouch 1200 MW à ELTRAF.
    * Montage et supervision.
    * Installation des équipements.
    * Superviser les interconnexions des différentes tuyauteries.

  • Babcock Montajes Algeria - Mechanical Engineer Jr

    2011 - 2011 Mechanical Engineer Jr with (Babcock Montajes Algeria) Project: Power Plant combined cycle (CCC 1200 MW) in Koudiet Eddraouch ELTRAF ALGERIA.
    Mounting and supervision:
    * Operations of mounts.
    * Installation of equipment. ;
    * Supervise the interconnections of the various pipes.

Formations

  • HSE (Annaba)

    Annaba 2011 - 2011 attestation

  • Ecole STS (Annaba)

    Annaba 2010 - 2010 Solidworks 2008

    dessin est conception par ordinateur.

  • Ecole Prive STS Annaba. (Annaba)

    Annaba 2009 - 2010 formation solidworks

    logiciel de conception mécanique

  • Université Badji Mokhtar De Annaba (Annaba)

    Annaba 2003 - 2006 DEUA en fabrication mécanique

  • Université Badji Mokhtar De Annaba (Annaba)

    Annaba 2003 - 2009 Diplôme Ingénieur d'état

    ingénieur d'état en génie mécanique option: construction mécanique

  • Université Badji Mokhtar De Annaba (Annaba)

    Annaba 2003 - 2009 Ingénieur en Génie Mécanique

    - Construction Mécanique.

  • Uniersité Badji Mokhtar Annaba (Annaba)

    Annaba 2003 - 2009 Ingénieur en mécanique

    spécialisé en construction mécanique.

  • Université Badji Mokhtar De Annaba (Annaba)

    Annaba 2003 - 2006 Diplôme DEUA

    fabrication mécanique.

  • Université Badji Mokhtar De Annaba (Annaba)

    Annaba 2003 - 2006 DUEA Fabrication Mécanique

    - Etudes des procédures de fabrications Mécanique.

Réseau

Annuaire des membres :