-
QC Inspection
- QA/QC Inspector
2008 - 2012
I have been incorporated with TOTAL ( Pazflor Project) to the inspection department as a QC inspector. My mission was to follow the manufacturer FLEXIFRANCE for IPB (Integrated Production Bundle) Flexible risers/ Flowlines / flextails/ Jumpers and there accessories, GE Masoneilan for Valves, manufacturing of bend-stiffeners at BARDO, end fittings at FTV, bend restrictors at LACMIL, HDC, pull in heads, latching mechanism (BSF/BSHD), handling frame, wet parking frame, valve inspection, bend restrictors, anodes, buoy, buoy clamp...
EXPERIENCE WITH TOTAL/ TECHNIP
- QA/QC INSPECTION:
Responsible EH&S/QA manager for the direction and implementation of Quality Policy, Quality Objectives, ISO 9001 as required by the Quality Management System. Interface with senior client management to ensure alignment and understanding of requirements to enable effective oversight of contractors and suppliers.
Developed quality standards, processes, requirements and conducted Quality/Safety audits and surveillance of contractors, suppliers and personnel involved in the project.
Monitored & evaluated supplier inspection activities. Reviewed, prepared quality design specifications, procedures, policies, statement of works (SOW), Request for Quotes (RFQ) and Information (RFI
* Revue of ITP (Inspection Test Plan or Quality Plan) ;
* Organize meeting/ kick off meeting or follow supplier weekly meeting ;
* Organize Pre inspection meeting ;
* Re-launch of suppliers for delivery, up-date schedule, drawings, procedure... ;
* Follow-up of the production and reporting
* Record of the NCR
* Report for HSE dpt
Other Orders:
Manoir Industries PITRES ( France )
Mannesmann KTI Demag - Radiant Coils Assembly PO 01.31808.00.17.11.000
ABB LUMUS NL Radiant Coils Assembly PO BA-0402-OXBA001
KTI-DOW 01.3189300.17.15A.00 Radiant coils assembly
Technip USA Qatar APCI Purchase 30003H0001 Complete furnace radiant coils assemblies : 120 parts
Technip (Repsol) PO 01.31970.00.17.11 nine complete furnace radiant coils assemblies
Technip PO 01.31971.0123.01 six complete furnace radiant coils assemblies
Thermodyn PO XM347404.10. Valves boxes (sub marine application)
SNAM Progetti PO 12632 - Catalyst tubes (528P) + hot collectors (12P)
GE/ Masoneilan
PROSERNAT PO 013016907332 16 control valves
WOOD GROUP PO 88/123209 12 control valves
REPSOL PO C330001 3 control valves Tag ° 422.pcv.054/ 4024 / 3029
RANHILL WORLEY PO PPML-POKL-047-2003 8'' Tag N° FCV 95203D
ALSTOM POWER PO 80065 011 & 80066 011 12 valves
ALL TOTAL PO's FOR CONGO ( OSS SHORE CONTROL VALVES)
Vallourec
Technip Italy , ABQAIP Project (TAD/DMV) Seamless stainless pipes TP316L for Aramco.
Petrofac PO 9789-6005B Line Pipe 273.1 x 7.80 X60 PSL2 17000m.
Tiga Phillips (Bayu Undan project) , stainless steel, duplex & titanium pipes , 2500m (DMV Montbard)
Chevron Texaco PO 8060 12'' Export Pipe Line + 10'' Water Injection Banzala 10000m.
Technip UK ( Talisman Wage Project ) PO 006131. Line Pipe X60PSL 273 x 11.10 11000m
QA/QC for PAZFLOR project at SURF dpt (IPB/ Risers and Flowlines, handling frame, wet parking frame, valve inspection, pump, steam turbine)
TOTAL / TEPA
-
Total
- QC site representative
COURBEVOIE
2008 - 2011
Actually working for TOTAL (TEPA) as Site Representative for PAZFLOR Project
1 Flexible Pipe and Accessories Specialist (FLEXI-FRANCE ex COFLEXIP and NKT) and SURF activity
2 Site Representative: presently in charge of IPB (Integrated Production Bundle) Flexible risers/Flowlines/flextails/ Jumpers and there accessories manufacturing (bend-stiffeners, end fittings, bend restrictors, pull in heads, latching mechanism, hang off collars…)
3 Key Words: Inspection, Technical Authority, Wild NDT knowledge (was qualified) (MPI, DPI, X-ray), tensile test, hardness test, FAT/SIT, Knowledge of flexible packing, Offshore Flexible installation, Vacuum test, Welds: TIG, MIG, forging weld, plastic welding, HSE…
4 Type of inspected suppliers:
Forging
Coating/ painting of equipment
Rigid pipe (carbon steel, duplex/ SDX…)
Cladding/ Welding
Machining
Structures
Winch
Umbilical
Cables
-
QC Inspection
- Co-ordinator
2007 - 2008
I have been incorporated with TECHNIP to the Inspection Dpt as a Inspection Co-ordinator. My mission was to follow SURF suppliers of different projects,. Notify external inspector and interface with client.
EXPERIENCE WITH TECHNIP
- QC INSPECTION Department:
Project QC Inspection co-coordinator responsible a variety of business and program assignments with in cross-functional teams, executive sponsors, and steering committees. Projects encompassed all lines of business within customer internal and external quality requirements. Responsibilities included supporting both strategic and operational priorities and objectives.
Directly supervised, evaluated, trained and directed eleven Quality and Risk Engineers in the development of program Quality Assurance functions for various projects.
Utilized structured project management processes to lead the planning, development, execution, and integration of enterprise-wide policies, procedures, and processes to meet customer expectations, on schedule and with requisite quality.
* Revue of ITP (Inspection Test Plan or Quality Plan) ;
* Organize meeting/ kick off meeting or follow supplier weekly meeting ;
* Organize Pre inspection meeting
* Organize inspector assignment ;
* Re-launch of suppliers for delivery, up-date schedule, drawings, procedure... ;
* Follow-up of the production and reporting
Supplier or sub-suppliers inspections are the main purposes of my job. All QC aspects are checked on supplier premise. HSE side is to be in accordance with Technip rules.
QC inspection Technip Paris. , Flexible pipes, handling frame, wet parking frame, valve inspection, bend restrictors, anodes, buoy- , buoy clamp...Tiga
-
ACERGY
- QC/ Expediter Engineer
2006 - 2007
I have been incorporated with ACERGY (SUBSEA 7) to the SCM (Supply Chain Management) as a QC/ Expediter Engineer. My mission was to follow NKT accessories and NKT Flexible production. Notify external inspector and interface with client.
EXPERIENCE WITH ACERGY
- Supply Chain Management:
* Revue of ITP (Inspection Test Plan or Quality Plan) ;
* Organize meeting/ kick off meeting or follow supplier weekly meeting ;
* Organize inspector assignment ;
* Re-launch of suppliers for delivery, up-date schedule, drawings, procedure... ;
* Follow-up of the production and reporting
* Establish bid comparison of manufacturers
Supplier or sub-suppliers audits are the main purposes of my job. All QA/QC aspects are checked on supplier premise. HSE side is to be in accordance with Acergy rules.
Paris;Flexible pipes, handling frame, wet parking frame, valve inspection, bend restrictors, anodes, buoy, buoy clamp...
-
Technip
- IMR supervisor
Paris
1996 - 2006
I have been involved with technical support planning and risk analysis as an IMR supervisor (Inspection, Maintenance and Repair) for many years and am highly experienced in all aspects of the offshore flexible pipe industry. I am involved in planning and providing technical and operational guidance during offshore projects. I am also in charge for supply the certification needed on flexible pipes (COSHH, Calibration, special authorizations...). During this process I always closely lease with the multidisciplinary team involved in projects of this nature and making sure of client satisfaction.
EXPERIENCE WITH TECHNIP-FLEXI-FRANCE
- External Sheath Repair
Development of the new process
Instructor for plastic welding in France, UK, Australia and Brazil
Specialist in extreme damage repair
Offshore Project assistance
Development and improvement of this process.
- End Fitting Mounting (on-shore/offshore)
Continuous training in new End Fitting designs.
Lead team of end fitters, riggers and liaise with subcontractors
Qualified welder for MIG/TIG on carbon steel and stainless steel
Using of Ultrasonic, caliper, surface controller, temperature measurer unit.
Handling of the flexible pipe
Permanent Control report
- Flexible recertification
High pressure test
Video inspection
General inspection
Corrosion inspection
Annulus vacuum test
- Logistic on site (Project assistance)
Constant interaction with local riggers
Liaise with subcontractors
Problem solving and improvisation with clients.
Documentation and DPR
Organization and management of teams.
Note: All work was performed under ITP (Inspection Test Plan) if required.
Inspection, Maintenance, Testing and Repair of flexible pipe products and their accessories worldwide.
Technip - Le Trait
-
Coflexip
- Plastic Specialist
1994 - 1996
Plastic Specialist in Manufacturing of flexible pipes
This department was in charge of developing new production processes. I've have been involved with the evolution of the external sheath repair process. Our goal was to find a new plastic welding process in order to get repairs on flowlines and risers done efficiently and reliably. At the time plastic welding was a very unreliable process and it was my project was to develop new and better techniques. This has been achieved with the development of a portable extruder which is now common place on most offshore projects. I developed this procedure and it was proven by hard sample testing and approval by the relevant authorities. Since then I've been in charge for the technician training and qualification. Thus I am extremely knowledgeable in the field of flexible pipe repairs.
-
Coflexip
- Quality Control Technician
1993 - 1994
Quality Control in Manufacturing of flexible pipes
At the time Coflexip was a worldwide leader in the field of flexible pipe manufacturing. Since then the products and industry has evolved with clients needs. Being part of the quality control process of flexible pipe manufacturing gave me useful knowledge and insight on all the products and procedures. I was fortunate enough to be involved with the Norsk Hydro Troll Project for most of my time as Quality Control Technician. The process of quality control gave me the chance to understand the manufacturing of the flexible pipe from the start to the pressure test at the end. It was a good start in the flexible pipes world.
During this period, I have been trained on NDT level 2 (MPI and DPI). I was involved in ultrasonic thickness control, x-ray (Gamma), tensile tests on plastic and wires, hardness test on weld and materials...
-
Senoble
- Production Central Control Room Operator
JOUY
1992 - 1993
The company Coflexip was incorporated into the French company Technip in 2002. Thus I have been involved with this company for the past 14 years.
