François BEAUBE

En résumé

Entreprises

• Airbus Group - Systems and simulation engineer

  Technique | Hamburg, Germany 2020 - maintenant Systems and simulation engineer for the Zero Emission Aircraftin the Overall Engine Design Thermal Management System Team.
  Responsible for designing and modelling advanced air and cooling system concepts with a strong focus on internal aerodynamic and thermal optimization.

• Airbus Group - Systems engineer

  Technique | Toulouse, France 2018 - 2018 Immersion program within the transnational A350 Air & Fuel Systems MAP Team.
  Representing the systems engineering in front of FAL, delivery & flight tests centers by:
  -supporting the technical trouble shooting (NCs & TLBs) at FAL, flightline & delivery;
  -contributing to systems evolution & upgrades (SIs);

• Airbus Group - Systems engineer

  Technique | Hamburg, Germany 2016 - maintenant Systems engineer in the cabin & compartment ventilation team. Responsible for:
  -designing & developing the most effective & performing ventilation system;
  -integrating the air ventilation system into different Airbus programs;
  -providing technical support (MAP, FAL) & in-service support (customer services);
  -supporting R&D projects, integrating new technologies & innovative concepts into aircraft;
  Projects within the Air SystemTeam:
  -A320 Airspace: System Engineer for the Airspace XL-Bins development; Technical Leadfor the Full Airspace development;
  -A320: Responsible for the Optimized Cabin Temperature Zone feasibility analysis;
  -A350: Responsible of the Compartment Air Extraction (ATA21-23);
  -CFG: Support the Cabin Air & Thermal Comfort Customer Focus Group 2019 event;

• Airbus Group - Flight test installation engineer

  Technique | Marignane, France 2016 - 2016 Flight test installation engineer within the Instrumentation
  Architecture & Means Team.
  Responsiblefor the conception & integration of a new ballast system concept on several civil & military helicopters.

• Airbus Group - Engineer & work package leader

  Technique | Marignane, France 2015 - 2016 Engineer & work package leader within the Electrical Integration on Governmental Helicopters Research & Development Team.
  Responsible for:
  -establishing links between Airbus Operations GmbH & Airbus Helicopters SAS;
  -setting-up the macro planning & building the FCAC (workload profile) associated for the project;
  -investigating & setting-up the strategy scenarios (technical feasibility, planning & workload);
  -supporting the definition of the security strategy, technical export control & NATO awareness;

• Airbus Group - Flight test installation engineer

  Technique | Hamburg, Germany 2012 - 2016 Flight test installation engineer for all programs within a transverse team.
  The team is responsible for the flight test installation on all different Airbus programs.
  Responsible for:
  -defining the flight test and measurement requests in cooperation with the aircraft system specialists;
  -carrying-out specific design and installation of flight test;
  -developing and installing flight test Installation systems;
  -supporting the flight test during the complete flight test campaign.
  Projects within the Flight Test Installation Team:
  -A350: Responsible for S19, Responsible for Mini-Cabin, Work Package Leader for Air-Inlet & Work Package Leader Deputy for Pylon flight tests;
  -A321-ACF: Responsible for Sections & Cabin flight tests architecture;
  -A320 / A380: FTI Engineer for Cabin flight tests;
  -R&T: Support the smartboard, virtual reality, live tablet & smart glasses projects;

• Airbus Group - Systems engineer

  Technique | Bremen, Germany 2010 - 2012 Systems engineer in the hydraulic systems performance & integrity team.
  Responsible for:
  -defining, developing & functionally integrating hydraulic technologies toward enhanced aircraft systems;
  -carrying-out & support R&D projects, integrating new technologies & innovative concepts into current and future aircraft: A30X, A400M, A320ENH, A320NEO & A320.

• Atomic Energy of Canada Limited - R&D engineer

  Technique | Ontario, Canada 2009 - 2009 R&D engineer in the inspection, monitoring & dynamics department.
  Responsible for:
  -developing and setting-up a servo-mechanical tool for on-site monitoring of cables at nuclear plants using non‑destructive/-intrusive techniques;
  -supporting tool design;
  -optimizing tool program;
  -performing & analyzing test campaign.

• Element Six & Luleå Tekniska Universitet - Research engineer

  Technique | Robertsfors & Luleå, Sweden 2008 - 2008 Research engineer in the materials science & engineering department.
  Responsible for:
  -studying and analyzing the dimension changes and chemical reactions in diamond green compacts due to thermal treatment effects;
  -seting-up & performing thermal analysis;
  -studying chemical reactions;
  -building-up conclusion.

• Norsk Hydro - Intern/student

  Production | Pinon, France 2005 - 2005 Working in the products packaging chain.

Formations

• Universidad De Zaragoza (Zaragoza)

  Zaragoza, Spain 2009 - 2010 Diploma in spanish as a foreign language, european level B2 (proficient)

• Luleå Tekniska Universitet (LTU) (Luleå)

  Luleå, Sweden 2007 - 2008 Master's degree

• Université Technologique De Compiegne (UTC) (Compiegne)

  Compiègne, France 2006 - 2009 Master’s degree in mechanical engineering with a major in materials science and technological innovations and minors in formation in innovation and in world relations of companies (FIRME) and european studies (EE).

• Université Technologique De Compiegne (UTC) (Compiegne)

  Compiègne, France 2004 - 2006 DEUTEC (two-year university degree in science and technology). Intensive preparation program in science and technology for the national competitive entrance exams to French engineering schools.

• Lycée Pierre Mechain (Laon)

  Laon, France 2001 - 2004 Scientific baccalauréat
  With honours « mention bien ».