-
FIELDCORE
- TECHNICAL FIELD ADVISOR
2017 - maintenant
• As Compressor Technical Field Advisor I’m responsible to drive teams of technicians on installation and maintenance of Centrifugal and Axial compressors. Also responsible to communicate with back office engineering for any pack case or assistance .
Essential Function
• Geometric dimensional check of foundation, equipment and auxiliaries skids positioning, levelling and alignment.
• Installation and assembling activities of compressor auxiliary equipment (such as oil console, seal gas system, air console, interconnection piping, oil cooler, anti-surge system, oil flushing and blowing, etc).
• Pre-commissioning and commissioning of oil system, air system, seal gas system, anti-surge system
• Work closely with Instrumentation TFA during the installation, calibration and set-up of compressor electrical instrumentation (such as vibration probes, temperature elements, I/P converters,etc.).
• Verify the start-up sequence; provide assistance during the start-up phase, checking all functional parameters of compressor and equipment, in order to optimise performances and efficiency of steam turbine and to respect the minimum radial clearance between rotor and stator parts.
• Perform mechanical repairs and carry out any machine works at the machine tools in the workshop.
• Assembly, disassembly, check and adjust the installation and functioning clearances, evaluate the wear, or damage state of the compressor components
• Check and correct alignment conditions between driver and driven units
-
FieldCore GE
- Compressor Technical Field Advisor
2017 - maintenant
: FieldCore GE company: Compressor Technical Field Advisor (TFA III compressor)
* As Compressor Technical Field Advisor I'm responsible to drive teams of technicians on installation and
maintenance of Centrifugal and Axial compressors. Also responsible to communicate with back office engineering
for any pack case or assistance .
Essential Function
* Geometric dimensional check of foundation, equipment and auxiliaries skids positioning, levelling and alignment.
* Installation and assembling activities of compressor auxiliary equipment (such as oil console, seal gas system, air
console, interconnection piping, oil cooler, anti-surge system, oil flushing and blowing, etc).
* Pre-commissioning and commissioning of oil system, air system, seal gas system, anti-surge system
* Work closely with Instrumentation TFA during the installation, calibration and set-up of compressor electrical
instrumentation (such as vibration probes, temperature elements, I/P converters,etc.).
* Verify the start-up sequence; provide assistance during the start-up phase, checking all functional parameters of
compressor and equipment, in order to optimise performances and efficiency of steam turbine and to respect the
minimum radial clearance between rotor and stator parts.
* Perform mechanical repairs and carry out any machine works at the machine tools in the workshop.
* Assembly, disassembly, check and adjust the installation and functioning clearances, evaluate the wear, or damage
state of the compressor components
* Check and correct alignment conditions between driver and driven units
-
GRANITE SERVICE INT
- Site Manager & Field Service Engineer/Reciprocating
2015 - 2017
compressor
* Lead and execute Installation or maintenance of Reciprocating Compressor ensuring to follow GE recommended
procedures.
* Supervise the mechanical installation activities of main and auxiliaries equipment.
* Perform the reciprocating compressor pre-commissioning and commissioning.
* Lead and execute cylinder inspection with dis-assembly and assembly of piston, suction / discharge cylinder
and perform the relevant dimensional check and alignment check.
* Lead and execute crankcase inspection with minor, medium, major overhaul of main bearing, crank pin, crosshead, connecting rod, stuffing box, intermediate seal packing and all other internal parts.
* Assist Start-up Engineer during the commissioning phase ensuring proper and safe operation of the machine
by evaluating the running parameters and troubleshoot control system problem as they arise.
* Write accurate professional reports acting as single point of contact between Customers and GE Oil & Gas
Headquarter
concerning technical issues and interfacing with all involved functions.
* Use company e-tools to retrieve technical documents and management of packing list, bill of material and drawings.
* Ensure all in-field activities carried out safely complying with company environmental health & Safety (EHS)
guidelines and procedures.
* Compressors fleet: GEMINI RC: D602,E704,E604,A352,A354,F504//Nuovo Pignone: 4HM//Howden Screw
Compressor
WRV 204, 255
-
OMV/SEREPT
- Offshore Maintenance Superintendent
2011 - 2015
* Managing the maintenance of ASHTART assets consisting of different technologies ranging from eighties
technologies
(e.g. pneumatic control systems) to the most up to date technologies (e.g. d distributed control systems)
* Managing the offshore maintenance (i.e. mechanical, instrumentation, electrical and HVAC) team composed
of 30 persons per shift and located on the central platforms, the FSO and the satellite platform
* Set and maintained standards. Provided motivation and training for employees. Influenced and encouraged
personnel to participate in self-improvement p r o c e s s e s .
* Prepared maintenance daily and monthly reports highlighting major activities and KPI's
* Troubleshooting publications to solve problems. Interpret blueprints, schematics, manuals and
requirements for various mechanical processes.
* Developed training master plan for all maintenance team according to job needs ;
* Participated in objective setting, plan development and performance review of equipment performance
* Maximized reliability of the equipment within maintenance area of responsibility
* Analyzed incident reports according to SEREPT standards and using root cause analysis method.
* Experience in Commissioning, start up, shutdown planning and SIMOPS activities.
-
SEREPT
- Ingénieur Sécurite entretien et piping
Hammam Lif
2009 - 2011
Responsible for the designing, developing, and assisting in the inspection, maintenance and testing activities of the fields operated by Serept by providing technical support.
Ensures the safe, reliability and effective operation of all mechanical systems in Serept facilities
Communicate effectively and respects the safety rules during all work process steps, till the final close out, in a way satisfying HSSE and Operation Departments
-
OMV/SEREPT
- Mechanical Engineer
2009 - 2011
: OMV/SEREPT: Mechanical Engineer/Rotating equipment
-
SMG
- Fleet manager
2007 - 2009
* Planning of the preventive maintenance of the fleet of vehicle ;
* Team leader of the curative maintenance team ;
* Purchase responsible for spare parts and new material ;
* Stock Manager
-
Groupe Magasin Général
- Ingénieur Mécanique/ chef de parc roulant
2007 - 2009
* Responsable Maintenance :
Parc auto et véhicule poids lourds
Engins et materiels de manutention
*Etude de renouvellement de la flotte
*Relation concessionnaire auto et fournisseurs industriel
* GMAO et suivi KPI de Transport
