En résumé

Mes compétences :


  • PDB inspection - QC inspector

    2013 - maintenant  March 2013 – present, Freelance inspector

    Inspections performed on:

    Heat exchangers at Alfa Laval plant (Grenoble and Nevers), Mersen (brignais), Brown Fintube (Thonon)
    • Visual inspection and dye-penetrant examination of plate pack fusion welds
    • Visual examination and dye-penetrant examination of panel linings
    • Visual examination of nozzle, nameplate bracket & earth lug to panel welds
    • Witness of NDE (ferrite and carbon examinations, PMI…)
    • Visual & dimensional examination of completed units in accordance with approved G.A. Drawings
    • Witness of hydrostatic tests of exchangers and external examination during tests
    • Visual inspection of Painting & DFT checks
    • Stamping & fitting of ASME-U plates: National Board N°, “U”, “W” and RT1
    • Dew point measurements and nitrogen blanketing
    • Check of protection in foil bag sealed under vacuum, packing, robustness of case design, blocking & bracing, handling / care marks, HT/DB-treatment check on plywood and timber
    • Compilation of Manufacturing Data record

    Steel & stainless materials per ASME Code at Alfa Laval (Grenoble), SACM Durand (Baix), Castmetal (Feurs)
    • Visual & dimensional examination in accordance with approved G.A. Drawings
    • Witness of PMI and Carbon measurements on stainless materials
    • Review of Certified Material Test Reports
    • Full dye-penetrant examination on welded baseplate
    • Witness of dimensional examination
    • Witness of Magnetic Particle Test on stainless materials and steel casting materials
    • Witness of Ultrasonic tests on steel casting materials
    • Witness of defect area repaired by welding on steel casting materials

    Polyurethane Stiffener parts at Exsto (Romans)
    • Visual examination
    • Witness of Hardness test
    • Dimensional examination
    • Review test reports

    Pumps / Compressors at Clyde Union (Annecy), Sundyne (Longvic), Finder Pompes (Venissieux), CERG (Pont de Claix)
    • Witness of Hydro testing (pump case, seal housing…etc.)
    • Witness of CV measures and tests
    • Witness of Performance tests (Hydraulic performances, vibration, NPSH, noise…etc.)
    • Dismantling inspection after test
    • Witness of Complete unit test (« string test »)
    • Document review
    • Witness of dimensional and visual examination
    • Witness of packaging

    Pipes, flanges & fittings at MGI & Phocéenne (Marseille), Van Leeuwen Tubes (Meyzieu)
    • 100% Visual examination to ensure no instances of bad workmanship, smooth and regular finish, and contact surfaces in accordance with standard requirements per ASME standard
    • Dimensional checks per required schedules and specification requirements for outside diameter of flange, thickness of flange, diameter of hub, length through hub, bore, bolt circle, diameter of drilled holes, etc.
    • Product marking checks per ASME B.16.5-2009 : Manufacturer’s mark, steel grade, schedule number, pressure class, nominal wall thickness or size, and heat n°, and subsequent check against material certificates to ensure traceability
    • Review of EN 10204-3.1 certified material certificates

    AC & DC UPS at Chloride Industry (Chassieu)
    LV switchgear, AC and DC IRP and IPCS panels at Comeca (Chalon/saone)
    Generator circuit breaker at Alstom (Villeurbanne)
    • Visual & dimensional examination
    • Physical examination
    • Witness of FAT (Final Acceptance Test)
    • Document review
    • Review punch list
    • Packing

    Valves at Flowserve (Thiers), AIMCO TERM (Lyon), PENTAIR (St-Juery)
    • Witness of Hydrostatic tests on Valve seats and Valve bodies
    • Witness of Torque measurements for opening and closing
    • Witness of functional tests on valves with actuator
    • Witness of gas tests on valves with actuator
    • Workmanship, surface quality of materials
    • Review documents

    Mechanical tests at A2M (Fraisses), Bureau Veritas (Villars)
    • Witness of Tensile test per ASME IX
    • Witness of Bend test per ASME IX
    • Witness of Charpy impact test per ASME IX
    • Review of chemical analysis, hardness test and micrographic reports
  • Eurotop - Training

    2012 - 2013  March 2012 – March 2013: Training with EUROTOP Inspection & Expediting inspector

    Inspections performed on equipment for major oil and energy projects, equipment and materials
    - Heat exchangers
    - Valves
    - Pipes, flanges & fittings
    - Pumps / Compressors
    - Centrifuge
    - Steel & stainless materials
  • Flextronics - Responsable qualité produit / QCP manager

    Singapour 2005 - 2012 • Definition of quality goals for the product line.
    • Customer quality interface for the product line, reporting and handling of non-conformities, concessions and / or non-acceptances, issue of conformity certificate, definition of acceptance standards for new projects, etc
    • Monitoring of quality indicators and implementation of UL and ETL standards
    • Instigating preventive and corrective action plans
    • Maintenance of an effective corrective action data base. (5D/8D reports, PDCA…)
    • Placing manufacturing / shipping operations on hold pending established corrective action
    • Technical support to Procurement manager in cases of sub-supplier non-quality

  • Schlumberger - Technicien méthodes / process engineer

    Paris 2000 - 2005 service méthodes:
    - Gérer et mettre en place les modifications des dossiers de fabrication.
    - Supporter le bureau d’étude dans l’introduction des nouveaux produits en fabrication. (création des gammes de fabrication et des dossiers, définition des outillages…etc)
    - Traiter les ordres de modifications. (hardware et software)
    - Optimiser les procédés de fabrication.
    - Calculer le prix de revient.
    - Créer et qualifier les outillages de fabrication.
    - Gérer la base GPAO.
    - Etablir le rapport d’activités mensuel.
    - Participer à l’optimisation des processus SMT en lien avec la cellule Méthodes process.
  • Schlumberger - Technicien / electronic technician

    Paris 1981 - 2000 de 1981 à 1990, en charge du test et dépannage de sous-ensemble électronique (cartes ou produits).
    de 1990 à 2000, en charge de l'assemblage, du test, de la fiabilisation et du contrôle final de systèmes de test automatique assistés par ordinateur destiné à l'industrie de la micro-électronique. (micro-processeur, mémoires, circuit analogique...etc)
  • Schlumberger - Technicien production

    Paris 1981 - 1984 test & dépannage de sous-ensembles électronique


Pas de formation renseignée


Annuaire des membres :