-
Inspection Power
- Engineer QA/QC
2014 - maintenant
Power Plant Gas Turbine BISKRA Project (HANHWA E&C COREAN COMPANY)
Clients: SONALGAZ (CEEG/SPE)
Prepared and update the inspection test plane (ITP) and inspection test record (ITR)
Attend, assess and sign off all necessary inspections as identified in the approved Inspection and Test Plan (ITP)
Ensuring that electrical/Instrumentation construction activities (i.e. installation, loop checks, completions and pre-commissioning of the Electrical/Instrument works) are carried out by Sub-Contractors in accordance with approved Procedures, Specification.
Inspection of all electrical & instrumentation material.
-
French CSSI OIL&GAZ
- E&I QA/QC
2013 - 2014
Clients: JV (British Petroleum- STATOIL HYDRO-SONATRACH)
Ensure all the works are being carried out as per Issued for Construction / Approved Construction Drawing
Coordinate with Owner and the contractor, and carry out all inspection and testing as required
Inspect and verify the completed work as detailed in the approved Inspection and Test Plan and request Owner for inspection & approval
Maintain inspection and test records for future reference.
-
ALSTOM
- Electrical Maintenance Supervisor
GREASQUE
2010 - 2013
Tasks:
1.1Construction:
* Assistance in erection of second pumps(capacity 100 MW):
* Carry out & supervise the assembly activities of E&I Equipments. ;
* Insulation Tests of Instrument & Electrical cables. ;
* Ensure that works for parts electricity and instrumentation respect the requirements quality
* Responsible for pulling cable (Electrical and Instrumentation)&cable tray installation.
* Supervising installation of fire alarm system
1.2 Operation1&Maintenace
* Preparation schedules of preventive and corrective maintenance of various electrical equipments.
* Preparation of documents necessary for interventions (work permits, consignment sheets, sheets incidents .... ext).
* Organization, facilitation and training of response teams in electrical maintenance.
* Controlling maintenance operations carried out. ;
* Development of maintenance ranges (SCHEDULES) for the various equipments.
* Ensures the efficient, safe and proper shift of the pumping unit.
* Transfer of information and intervention reports. ;
* Implementation and monitoring of compliance with technical and regulatory requirements. ;
-
ALSTOM HYDRO FRANCE
- Senior Maintenance Technician
2009 - 2010
Tasks:
* Troubleshooting and anomalies facilities. ;
* Preventive maintenance of various systems and facilities. ;
* Transfer of information on interventions. ;
* Recording and tag out electrical facilities (LV-MV-HV). ;
* Take action on pneumatic and hydraulic parts. ;
* Provide technical support to the operator staff to ensure completion of job safety. ;
* Respond to any electrical parts of the site (HV AIS 220kV, transformers HV / MV
transformers MV / LV electrical distribution network MV-LV, MV panels, engines diesel generator, UPS,converter,recrifier, Fire Detection, air conditioning and ventilation system)
-
ALSTOM
- Senior Maintenance Technician
GREASQUE
2009 - 2010
Tasks:
* Troubleshooting and anomalies facilities. ;
* Preventive maintenance of various systems and facilities. ;
* Transfer of information on interventions. ;
* Recording and tag out electrical facilities (LV-MV-HV). ;
* Take action on pneumatic and hydraulic parts. ;
* Provide technical support to the operator staff to ensure completion of job safety.
* Respond to any electrical parts of the site (HV AIS 220kV, transformers HV / MV
Transformers MV / LV,Switchgear MV-LV, MV panels, Black start generator, UPS, Battery charger, Fire Detection, air conditioning and ventilation system)
-
ALSTOM HYDRO
- DCS Operator
2008 - 2008
: French company ALSTOM HYDRO FR as DCS Operator giant pumping station of capacity 200 MW
Tasks:
* Starting and driving two pump units of 100 MW each. ;
* Monitor all éventements daily. ;
* Monitor and record system parameters to ensure proper operation of the equipments.
* Perform startup, shutdown routine and emergency operation of the equipments.
(substation AIS 220 KV,pumps, power transformer, transformer tapping, HV, MV switchgear, compressed air system, oil station, generator, ventilation and air conditioning, refrigeration units and potable water units, batteries and battery charger, electrical cabinets and enclosures).
* Fault analysis and diagnostic alarms. ;
* Make up to maintenance service all defects and malfunctions on systems pumping station ;
-
ALSTOM
- Operator DCS
Saint Ouen
2008 - 2008
within as DCS operator giant pumping station of capacity 200 MW:
Tasks:
* Starting and driving two pump units of 100 MW each. ;
* Monitor all éventements daily. ;
* Monitor and record system parameters to ensure proper operation of the equipments. ;
* Perform startup, shutdown routine and emergency operation of the equipments.
(substation AIS 220 KV,pumps, power transformer, transformer tapping, HV, MV switchgear, compressed air system, oil station, generator, ventilation and air conditioning, refrigeration units and potable water units, batteries and battery charger, electrical cabinets and enclosures).
* Fault analysis and diagnostic alarms. ;
* Make up to maintenance service all defects and malfunctions on systems pumping station ;
-
Société privée hydraulique-électricité et climatisation
- Electrical engineer
2004 - 2008
:Electrical engineer in a company without electricity, hydraulics and air conditioning:
Tasks:
* Wiring all types of electrical cabinets and boxes (public lighting, building and industrial). ;
* Supervising electrical equipments erection (motors, pumps, generator, ext). ;
* Development and operation of electrical diagrams. ;
* Working on all electrical, hydraulic and air conditioning system. ;
* Monitoring the assembly team and intervention. ;
-
Company of Electricity
- Electrical Engineer
2004 - 2008
: private Company of electricy, hydraulics and air conditioning
Tasks:
* Wiring all types of electrical cabinets and boxes (public lighting, building and industrial).
* Supervising electrical equipments erection (motors, pumps, generator, ext).
* Development and operation of electrical diagrams. ;
* Working on all electrical, hydraulic and air conditioning system.
* Supervise and witness megger test and continuity checks for cable
* Monitoring the assembly team and intervention. ;
