Ahmed ZERTAL

En résumé

Entreprises

• Yuksel proje - Manager Quality Control

  2014 - maintenant

• JGC Construction International - Mechanical supervisor ( Construction + QAQC )

  2013 - 2014 JGC Construction International
  juillet 2013 – Aujourd’hui (1 an 5 mois)in amenas
  
  -Project : In Amenas Compression Project (IACP) (Sonatrach, BP Amoco and Statoil) / ALGERIA
  
  -Total value: $213million.
  
  
  Realizations
  
  • Controls the material supplied by the client and/or third parties before accepting it.
  
  • Supervise the installation of 2 gas turbo-compressor ( Turbine : MS500 2D and Compressor : BCL 604-2 ).
  
  • Ensure that all measuring equipment is identified, calibrated and suitable for testing.
  
  • Examine in detail the technical documents from suppliers.
  
  • Direct supervise and coordinate activities of the workers engaged in the erection of equipments (static equipments like pressure vessels, package, heat exchangers and rotating equipments like horizontal / vertical pumps, blower and air cooler ) and providing all explanations on how the work
  is to be performed
  
  • Review and comment on Contractor’s Inspection and Test Plans ITP(s)
  
  • Generate client Requests For Inspection (RFI) where required providing sufficient notice for Hold, Witness and Inspection points.
  
  • obtain the relevant documentation and ensure the correct implementation of the approved Inspection Test Plan according to Client’s requirements.
  
  • In line with the set detailed programmes, arranges for the correct and cost-effective performance of assembly work.
  
  • Follow the preservation state of equipment.
  
  • Arranges for inspection activities and the pre-delivery of completed works. Assists the superior in final inspection activities and hand-over of the works
  
  • Arranges for the problems regarding the progress of the work of his responsibility to be solved along with the client’s representatives and/or Sub-contractors.
  
  .• Promote a culture of Safety first and Environmental Awareness.

• Saipem - Mechanical Supervisor ( Construction + QAQC)

  Montigny-le-Bretonneux 2012 - 2013 Saipem
  juin 2012 – juillet 2013 (1 an 2 mois)Hassi Messaoud
  
  - Project : LDHP ( Separation of oil LDHP ZCINA ) SONATRACH HASSI-MESSAOUD / ALGERIA
  
  - Total value: $500 million..
  
  
  Realizations
  
  • Direct supervise and coordinate activities of the workers engaged in the erection of equipments.
  
  • Execute and submit inspection documentation works for static and rotating equipments to assure that the required forms used in testing submitted are approved by client representative as per ITP and QCP of the project.
  
  • Ensure that all measuring equipment is identified, calibrated and suitable for testing.
  
  • Supervise the rotating machinery alignment, compressors, pumps, turbines and electric
  motors.
  
  • Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP).
  
  • Shall perform a variety of inspection functions under supervision.
  
  • Record and document any and all deviations from the Project Quality Program and the Company Integrated Management System (IMS).
  
  • Coordinate with the client representatives to ensure that inspections are carried out expediently.
  
  • Generate client Requests For Inspection (RFI) where required providing sufficient notice for Hold, Witness and Inspection points.
  
  • Clearing the punch list items, construction activities and site modifications advices from client & Quality Control department as well.
  • Preparing the daily progress reports.
  
  • Examine in detail the technical documents from suppliers.
  
  • Liaise with Contractors Inspectors at site to promote quality awareness.
  
  • Promote a culture of Safety first and Environmental Awareness.
  
  • Attend project meetings as required.
  
  

• Saipem - Mechanical Supervisor ( Construction + QAQC)

  Montigny-le-Bretonneux 2010 - 2012 Eni saipem
  from 15/07/2010 to 15/06/2012
  
  -Project : LPG ( Extraction of the Liquids of Gases Associates )SONATRACH HASSI-MESSAOUD / ALGERIA
  
  -Total capacity : 8 million cu m/day.
  
  - Total value: €1.3 billion.
  
  • Supervise and coordinate the erection of 04 train’s turbo-compressor with a capacity of
  25 MW each: 4 turbine aero-derivative of PGT25 + (General Electric) driving the single-stage
  compressors 3BCL455 (Nuovo Pigon )
  
  • Supervise the installation of static equipments like pressure vessels, tanks, spheres, package, skids, heat exchangers and rotating equipments like centrifugal horizontal, vertical pumps, blower, air cooler, air compressor, turbo expander.
  
  • Direct supervise and coordinate activities of the workers engaged in the erection of equipments
  
  • Execute and submit inspection documentation works for static and rotating equipments to assure that the required forms used in testing submitted are approved by client representative as per ITP and QCP of the project.
  
  • Ensure that all measuring equipment is identified, calibrated and suitable for testing
  
  • Follow the preservation state of equipment.
  
  • Supervise the rotating machinery alignment, compressors, pumps, turbines and electric
  motors.
  • Preparing the daily progress reports
  
  • Examine in detail the technical documents from suppliers.
  
  • Liaise with Contractors Inspectors at site to promote quality awareness.
  
  • Promote a culture of Safety first and Environmental Awareness
  
  • Provide support and advice to the construction personnel in relation to the Project Quality Program .
  
  • Maintain a good working relationship with all project personnel.
  
  • Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc.
  
  

• BUREAU VERITAS - Mechanical Supervisor ( QAQC + Construction )

  Puteaux 2009 - 2010 BUREAU VERITAS
  23/11/2009 to 03/05/2010:
  Mechanical supervisor for the realization of the Convention Center of Oran (Hotel LE MERIDIEN-5-star hotel, Convention Center, Congress Palace).
  
  • Coordinate with the client representatives to ensure that inspections are carried out expediently.
  
  • Generate client Requests For Inspection (RFI) where required providing sufficient notice for Hold, Witness and Inspection points.
  
  • Continually carry out surveillance inspections on the project recording and documenting any and all deviations from the Project Quality Program and the Company Integrated Management System (IMS).
  
  • Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within calibration prior to use.
  
  • Provide support and advice to the construction personnel in relation to the Project Quality Program .
  
  • Manage and instruct a team of workers and sub-contractors to perform on site installation / alignment processes
  
  • Monitor job progress and ensure quality work at targeted schedule.
  
  • Assist in coordinating in the preparation and execution of project inspections for the proper handling over to clients.
  
  • Attend project meetings as required
  
  • Promote a culture of Safety first and Environmental Awarenes

• KBR / Somik - New mega train (GNL.2K) - Structural steel Supervisor

  2009 - 2009 KBR / Somik - New mega train (GNL.2K)
  février 2009 – novembre 2009 (10 mois)Skikda
  
  Mechanical Supervisor for the implementation of the new mega train (GNL.2K)
  • Supervisor of structural steel erection at the pipe rack and around equipment.
  
  • Coordinating daily tool box talk with all employees.
  
  • Liaise and coordinate with other departments on project issues.
  
  • Assist in coordinating in the preparation and execution of project inspections for the proper
  handling over to clients.
  
  • Prepared daily report and submit to site superintendent.
  
  • Clearing the punch list items, construction activities and site modifications advices from client & Quality Control department as well.
  
  • Promote a culture of Safety first and Environmental Awareness.

• Somik - Maintenance Supervisor

  2004 - 2009 • Supervise the maintenance of pumps and different types of valves:
  
  * At the main workshop.
  * Refinery and LPG (Skikda)
  * THE HELI SON-SKIKDA-(various maintenance operations).
  * On the boat WAD GUETRINI (transport bitumen).
  
  • Supervise the installation, alignment, maintenance & restore the pump, compressor, fan, conveyer, and many type of heavy machinery.
  • Maintenance and adjustment of various mechanical seals.
  
  

Formations

Pas de formation renseignée

Réseau

• Amar DJAOUZI

• Charlie GROULT

• Malik MEKKI

• Naim BOUFAMA

• Rachid TOUARSI

• Sarbacane COMMUNICATION

• Thomas JAVICOLI

• Wahid REBZANI

• Yacine MECHERI