André MEDAWAR

En résumé

Entreprises

• LEOSPHERE - Project Manager

  Orsay 2013 - maintenant Project Manager for the development of products:
  -Establishment of product specifications
  -Project initiation, planning, monitoring and closing
  -Initiation of project Risk Analysis
  -Coordination of building product FMEA
  -Product budget management
  -Management of Project Reviews
  -Validation of the designs regarding the specifications
  -Obsolescence monitoring and recording feed-back experience on older products

• Avent Lidar Technology - Integration and Validation Engineer, R&D

  2010 - 2012 Participation in the industrialization process of a Doppler Lidar product used for Wind Turbine Power curve measurements, Yaw error correction, Wind sector management and Anemometer calibration :
  
  In charge of the integration and validation of the product:
  -Participating in the development and definition of the product
  -Planning and preparing of system tests
  -Analyzing and reporting test results
  -Defining system quality indicators
  -Cooperating with Mechanical and software designers to detect root causes of critical problems
  
  Management of product upgrades
  
  Troubleshooting Lidar failures and help in problem solving actions
  
  Production supervision during 6 months
  
  Manufacturing of prototypes:
  -Qualification of components
  -Supply Chain
  -Manufacturing and validation of several prototypes
  
  Installation on Wind Turbines throughout Europe
  
  Training of engineers, operators and technicians
  
  Close cooperation with the customer service department for smooth field operations and customer service
  
  Close cooperation with the marketing and sales departments to meet customer expectations, elaborate on customer requirements in order to continuously ameliorate our products and services.
  

• Leosphere - Stage Ingénieur R&D et production

  Orsay 2010 - 2010 The internship prompted me to enquire about, analyze, assemble and validate LIDAR (Light Detection And Ranging) systems that will serve the field of wind energy.

• Draka - Stage Ingénieur R&D

  2009 - 2009 The internship consisted of establishing a connector model for multimode Optical Fibers
  
  - Co-Publication of a paper for the IWCS conference
  - Conception of an optical fiber connector model
  - Study of the effect of different fiber characteristics on the performance of a transmission system
  - Modeling of connector losses between two multimode fibers.
  - Comparison to measurements done in the laboratory.

• NXP - External

  2008 - 2009 Developping a LabVIEW Software for a RadioFrequencyIDentification application

• DIEHL Aerospace GmbH - Stage Ingénieur R&D

  2008 - 2008 The objective of the traineeship was to establish an Optical link with a Polymer Optical Fiber for the AFDX (an Avionic Ethernet Protocol)
  
  - Contact with German & European suppliers
  - Test of the link

Formations

• Université Paris 6 Pierre Et Marie Curie UPMC

  Paris 2009 - 2010 Lasers, Photonique, Matériaux. Etude de l'interaction entre matériaux et lumière laser
  
  Optique des solides,Couches minces.Applications: nanophotonique, écrans plats, métrologie

• Ecole Nationale Supérieure D'Ingénieurs ENSICAEN

  Caen 2006 - 2009 Optique, Instrumentation et Capteurs
  
  Fibres optiques, lasers, diodes lasers, photorécepteurs, capteurs optiques,instrumentation et capteurs, contrôle non destructif, transmission de données, caméra CCD, ZEMAX, LabVIEW, MATLAB, PSPICE, Langage C, Assembleur, Temps Réels, Java.
  

• Lycée Paul Valery

  Paris 2004 - 2006 MPSI-MP
  
  Maths Supérieures - Maths spécialisées
  
  Mathématiques, Physique, Chimie et Sciences de l'ingénieur

Réseau

• Alain MEDAWAR

• Anne-Sophie TESSIER

• Ivan LOVRIC

• Kevin BUTTER

• Laurie BERTHIER

• Léa LANCRENON

• Lebecq JULIEN

  Dynaopt (Champigny-sur-Marne)

• Nicolas JANIN

• Wafaâ AMAL

• Xavier DONZEL