Cherif HOUSSOU

En résumé

Entreprises

• Evolutec International - DCS/SIS Commissioning Engineer

  Pau 2014 - maintenant * Project: Ain Salah Gas CPF/REG -Algeria-
  * Owner/Contractor: Sonatrach-BP/Petrofac
  * Duties:
  * SAT and Commissioning of DCS System with Yokogawa CS 3000. ;
  * SAT and Commissioning of SIS (ESD/F&G) with Yokogawa PROSAFE RS. ;
  * Provide high-level technical support for all issues related to electrical,
  Mechanical, Instrument, DCS and SIS.
  * Interlock (SIS) integrity management. ;
  * Loop Check, Functional test and Startup test. ;
  * Perform Safety Logic changes and improvement. ;
  * Troubleshoot and resolve control logics issues. ;
  * Communication test (TCP/IP, Profibus, Modbus, TITRA and HART). ;
  * Performance Test and Punch list clearance.

• YOKOGAWA - SCADA Commissioning Engineer

  2012 - 2014 Evolutec international/Yokogawa MIDDLE EAST ;
  * Project: CPF ELMERK PROJECT-HASSI BERKINE -
  * Owner/Contractor: Sonatrach & Anadarko/Petrofac ME & ABB ;
  * Duties:
  * Pre-commissioning and Commissioning for 80 wells and 10 FGS with
  Yokogawa Stardom RTU and Fast tools HMI.
  * Loop check, Functional/Logic test and ARH test for all wells and FGS's.
  * Provide high-level technical support / advice to chronic facility failure issues
  related to Mechanical, instrument, and DCS& SIS, and electrical facilities
  * Communication test between Yokogawa systems and Vendors subsystems
  (Bentley Nevada Temperature & Vibration system, ABB Electrical room,
  SLB and Weatherford systems) using TCP/IP, Modbus protocols.
  * Performance test (72Hours) and trips monitoring. ;
  * Management of technology changes related to mechanical, instrument &
  control, electrical hardware design
  * Technical assistance during startup with Client and Contractors.
  * Logic modification for all 07 wells typical (Water source, Water injection,
  Gas injection, Gas condensate, Oil production Dilution Water and Gas lift).
  * Communication test between wells/FGS and CCR (CentumVP & ProsafeRS).
  * Preparation of SAT sign off procedure and Technical documents.

• YOKOGAWA - SCADA Engineer

  2012 - maintenant (Commissioning Off site / Yokogawa ME: CPF ELMERK Project
  Hassi Berkine - ELMERK -Algeria
  
  * Pre-commissioning and Commissioning for 80 wells and 10 FGS
  (Field Gathering Station) with Yokogawa Stardom.
  * Loop check, Functional/Logic test and ARH test for all wells and FGS's. ;
  * Performance test (72Hours) and trips monitoring. ;
  * Technical assistance during wells and FGS startup with (SH, GB, ABB,
  Petrofac and Anadarko).
  * Logic modification for all 07 wells typical (Water source, Water injection,
  Gas injection, Gas condensate and Oil production with or without Dilution
  water and Gas lift).
  * Communication test between wells/FGS and CCR (Centum VP and
  Prosafe RS).
  * Preparation of SAT sign off procedure and Technical documents.

• Kellogg Brown & Root - QA/QC Coordinator

  2009 - 2012 (QA QC Welding and Instrumentation) ;
  
  * Project: NEW LNG TRAIN PROJECT -
  * Owner/Contractor: Sonatrach
  * Duties:
  * Daily Tracking and inspection of welding, piping and instrumentation
  progress and RFI/NCR clearance.
  * Daily checking of respect of KBR project specification and standards in
  daily welding, piping and instrumentation activities.
  * Administrator of KBR MAXTRAX welding, piping database and Team leader
  Of 04 QC DATA Clerks.
  * Creation of Tracking Data base for all QC documents and Test packs
  with ACCESS, SQL queries, EXCEL Macro's and Visual Basic programs
  * Tracking of all NDE tests (MT, PT, RT and UT) as per KBR specifications.
  * Tracking of welders Qualification, production and rejection rates.
  * Tracking of Contractors working progress and RFI/NCR clearance.
  * Strong knowledge of P&ID/ISO drawings, WPS/PQR procedures and
  ASMI/IEC standards.
  * Daily Coordination with Project control and Construction departments.
  * Daily Coordination with engineering department regarding Design and
  Field issues and modifications.
  * Generating of daily and weekly reports, statistics and Trends with MS
  Office and VB Programs for upper managements.
  * Participation in QA/QC, HSE and Construction meetings. ;
  * IT support for all hardware and software problems. ;
  * English interpretation in meetings between KBR and local contractors.

• KBR - Computer Engineer - DB Adminstrator

  2009 - 2012

• EVOLUTEC INTERNATIONAL - Automation Engineer

  2008 - 2009 (DCS/ESD/F&G/SCADA) ;
  (AUTOMATION & CONTROL SERVICES):
  * Programming of DCS programs with Yokogawa CS 3000 (Project In Salah Gas). ;
  * Programming of cause and Effect Matrix for F&G /ESD programs with Yokogawa Prosafe Rs (Project Yombo B - Congo-)
  * Charging programs on PLC/Automat and run Simulation test.
  * Preparation on Functional Analyze (AF/FDS) for projects.
  * Reading and preparing Technical and Engineering Documents.
  * Participation on FAT/SAT step in commissioning projects.
  * Participation in Pre - Commissioning and Commissioning.
  * Supervision of Engineering Systems and Maintenance Systems.
  * Animation seminars and training courses.

• EVOLUTEC INTERNATIONAL - Automation Engineer

  2008 - 2009 * Duties:
  * Programming Logics of DCS programs using Yokogawa CS 3000 ;
  * Programming Logics of SIS F&G /ESD programs with
  Yokogawa Prosafe Rs (Project Yombo B Congo -Evolutec France-).
  * Programming of safety programs using Triconex (Tricon, Trident).
  * Charging programs on PLC/Automat and run Simulation test.
  * Preparation of Functional Design specification (FDS), Control narrative,
  Control Loop Diagrams, Cabinets layout and Data sheets for projects.
  * Reading and preparing Technical and Engineering Documents.
  * Installation, calibration and HART simulation of all type of instruments
  (Pressure, Temperature, Level, Valves and Motors).
  * Participation on Site survey, FEED, FAT and SAT project phases.
  * Participation in project Pre - Commissioning and Commissioning.
  * Supervision of Engineering Systems and Maintenance Systems.
  * Animation seminars and training courses.

• Skikda University - IT Engineer

  2005 - 2006 * Informatics responsible of the residence hall N°:01. ;
  * Installation, maintenance and repair of all MS.windows and Computers.
  * Troubleshooting and configuration of Printers, Cisco Router and Switches.
  * Configuration of Satellite internet connections and multiuser accounts.
  * Creation of a Locale network and Administration under Win2003Server.

• University of Skikda - IT support Engineer & Computer Teacher

  2005 - 2007 * Duties:
  * IT engineering support of all issues (HARDWARE and SOFTWARE) in the
  University of Skikda -Algeria.
  * Teaching the university students Computer Skills (IT Office and Internet). ;
  * Networking configuration (TCP/IP, DHCP, DNS, Active Directory ...).
  * Troubleshooting and configuration of Printers, Cisco Router, Switches and

Formations

• Evolutec International (Skikda)

  Skikda 2008 - 2009 DCS, SIS AND SCADA ENGINEER
  
   Yokogawa DCS system (CS 3000/Centum VP).
   Yokogawa SIS system (Prosafe RS).
   Yokogawa SCADA system (Stardom/FASTOOLS).
   Invensys safety system (Triconex –Tricon/Trident).
   Siemens PLC (STEP7 and Wincc)
   Schneider PLC (MODICON 300).
   EMERSON DCS (DELTA V).
   General Electric SCADA system (Cimplicity & Proficy).
   Supervision of Process and Industrial Instru

• Science Technique School (Annaba)

  Annaba 2008 - 2008 Installation and Administration of Networks via Windows 2003 server
  
  * Training Center: STS ( Science Technique School -: Signed By STS center.
  * Installation and Administration of Networks via Windows 2003 server
  (TCP/IP, DHCP, DNS, Active Directory ...).

• Ecole STS (Annaba)

  Annaba 2008 - 2008 Network Adminstrator
  
  • Vocational training has duration of 03 months
  - School STS (Science Technique School -Annaba).
  - Installation and Administration of Networks
  - Local Area Network (LAN) and (WIRELESS).
  - Administration networks with Windows 2003 Server
  

• Skikda University (Skikda)

  Skikda 2000 - 2005 COMPUTER ENGINEER
  
  COMPUTER ENGINEER DIPLOMA
  OPTION : INDUSTRIAL AND AUTOMATION

• Skikda University (Skikda)

  Skikda 2000 - 2005 Computer Engineer
  
  Computer Engineering in Industrial and Automation

Réseau

• Abderraouf HAMICI

• Alg SUD

• Ali BOUMEZBAR

• Carrière ALGÉRIE

• Dah MED RIAD

• Es'tete MENA

• Farid TEBANI

• Laib SALAH

• Paul KLEBAIS

• Sébastien ROUSSEAU