-
FOURE LAGADEC CAMEROON
- Manageur QA/QC.
2013 - 2019
October 2013 to September 2019
Company : FOURE LAGADEC CAMEROON
Activities : Oil & gas
Job Title : QA/QC MANAGER.
Project : REVANPING EVOLUTION DU SCHEMA DE RAFFINAGE SONARA EPC PHASE 1
Descriptions : Quality manager for entire SBC08 and SITE25.
Responsibilities;
Plan and implement the Project Quality Management System (PQMS) activities within the project.
Plan, prepare and ensure the project Quality Control (QC) activities implementation.
Report to the Project Manager Information and data about project in line with corporate guidelines.
Act as focal point for quality related matters within the project and in liaison with external entities.
Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality.
Conduct external audit to Vendors and Subcontractors QMS as per project requirement.
Ensure, within the project organization, the planning of activities aimed at promoting the applicable Quality Assurance Plan (QAP).
Plan and allocate Quality resources to the various area of the project, managing them in liaison with involved Quality functions.
Conduct QA/QC inspections site maintenance and capital projects to ensure compliance with applicable codes and company standards (materials conformance and traceability, fabrication, repairs, alteration, coating and installation).
Assess day to day quality control practices and provide feedback to assist Project Leads.
Attend project walk downs at various stages of facility installation and completion.
Witness key hold points, such as: Hydro tests, Buried Piping Installation, Vessel Closures, Closure Welds, and Anode Installation Verification.
Perform visual inspections and non-destructive testing in accordance with ASME/ASNT/AWS/API Codes and any other applicable governing code or company / client’s specification or procedure.
Review all NDE reports, X-ray film, PWHT charts, hydro test chart etc. available on projects, for compliance with applicable codes and standards.
Verify QC programs are adequate and effective to project requirements.
Verify and implement welding programs are in compliance (WPS, PQR, WPQ and continuity logs books).
Ensure welding consumable handling and storage is correct (rod storage, oven, P numbers etc.).
Ensure paint program is sufficient and conducive for reliable coatings in accordance with project coating specifications.
Ensure material handling, storage and traceability program is implemented and effective.
Attend Pre-Startup Safety Reviews as Asset Integrity representative.
Assemble all construction documents (UI-As, as-built, construction data books, etc.)
-
FOURE LAGADEC
- QA/QC MANAGER
Le Havre
2013 - 2019
Activities : Oil & gas construction (onshore / offshore) etc.
Project : REVANPING EVOLUTION DU SCHEMA DE RAFFINAGE SONARA EPC PHASE 1
Descriptions : Quality manager for entire SBC08 and SITE25.
Responsibilities;
Manage the entire SBC08 and SITE25 projects approximately 6000T of piping, including the installation and modification of various types of equipment's such as hot & cold exchangers, colons, pumps, boilers, filters, etc. Prepare entire quality procedures thats QAP, various ITP, various welding books base on various material groups numbers & P-numbers, weld repairs procedures, MTR procedures, consumable traceability procedure, welding consumable procedures, visual inspection procedure, PWHT procedures, hardness testing procedures, hydro test procedure, Pneumatic procedure, external insulation procedures, NDT procedures etc. being a total of about 70 different quality procedures.
My responsibilities externs by attend all quality meetings with clients on weekly bases, review MIR & material certificates, review PWHT card and report, review PMI and Hardness testing reports, coordinate all NDT activities with CPY, prepare piping test package and coordinate all hydro test,
Page 2 of 5
Follow up construction punches, generate NCR, prepare quality welds statistic surface & volumetric, repairs / welders statistics, entering and updating entire welds history register, signing off WHR with CPY as to drawing wise preparing quality final documents day to day, coordinate with site QC inspectors and QDC for daily activities and progress, reporting directly to project manager.
-
Ponticelli
- QA/QC Supervisor
Émerainville
2013 - 2013
Activities : Oil & gas construction (onshore / offshore) etc.
Descriptions : Responsible for complex & satellite platform quality database for the entire project.
Responsibilities;
Structural follow-up for platforms rehabilitation ongoing, reporting directly to QA/QC manager on onsite, Coordinate all NDT activities with CPY, Generate NCR, Prepare quality welds statistic surface & volumetric including repairs length / welders wise, Entering and updating entire structural welds history register, signing off WHR with CPY as to drawing wise preparing quality final documents day to day, coordinate with site QC inspectors for daily activities and progress etc.
-
Orsam Takoradi
- QA/QC Supervisor
2012 - 2013
Activities : Oil & gas construction (onshore / offshore) etc.
Descriptions : Manage all quality activities and handle clients for entire company.
Responsibilities;
* Prepare inspection test plans for project.
* Inspect & review material certification as applicable specification.
* Prepare welding books, WPS, Manufacturing record books.
* Manage welding store for consumable storage includes hold / backing temperatures, lot number.
* Monitor and signing off RT films, PWHT, hydro testing reports for acceptance limits as to current specification.
* Coordinate fabrication in stages that is before, during and after welding with client representative.
* Coordinate NDT, PWHT, and hardness, hydro testing as to NDT map, specification & drawing.
* Review RT films for acceptance limits as to current specification.
* Review Post Weld Heat Treatment (PWHT) record chart as to ITP, drawing and specification.
* Review weld history sheets, material traceability, visual reports, NDT reports etc.
* Coordinate with client for periodic monitoring of construction project.
-
Bureau Veritas
- Industrial Surveyor
Puteaux
2012 - 2012
Activities : Industrial certification, NDT inspection, welding inspection etc.
Descriptions : Perform third party inspection, welding inspection, QA/QC, welders Qualification and prepare welding procedure qualifications (WPQ), PQR onshore / offshore respectively.
Page 3 of 5
Responsibilities;
* Review and approve of inspection test plans.
* Inspect and review material certification as applicable specification.
* Review procedures, drawings general requirements.
* Inspect welding store for consumable storage includes holding & backing temperatures, lot number
* Randomly inspect fabrication in stages as to ITP, drawing, specification, WPS.
* Coordinate with manufacturer for good engineering practices, WPS, drawing and specification.
* Raise NCR & AFC, if any deviation from drawing & specification during field inspection.
* Review and signing off RT films, PWHT, hardness, hydro testing reports as to NDT map and drawing, for acceptance limits as to current specification.
* Witness hydro testing & pneumatic testing as to drawing design requirement and specification.
* Dimension and final dimensional survey with manufacturer inspector as to ITP and drawing.
* Approve signing all manufacturer final reports records that is ITP, welder qualification, dimensional reports, welds summary sheets, visuals etc.
-
Maritime Industrial Services Co.LTD.
- QC Inspector
2009 - 2011
Activities : EPC, oil rigs construction, oil & gas plan construction, pressure vessels etc.
Descriptions : Main yard QC inspector handling individual projects.
Responsibilities;
* Preparing inspection test plan and submit for client approval (IPT).
* Ensuring vendors certification meets purchase order and applicable relevant material specification, which includes chemical properties, mechanical analysis.
* Material inspection against goods receiving reports, certification are correctly process that is Mill certificates as specification, MIR / MRV / PMI / Dee meter.
* Review drawings general requirements, procedures as to code.
* Inspect welding store for consumable storage, which includes hold/backing temperatures, lot number.
* Monitor fabrication in stages that is before, during and after welding as to drawing, code and WPS.
* Coordinate with welders and fitter for work safety awareness, good engineering practices, WPS, drawing and specification.
* Raising non-conformance reports (NCR) against production, if any deviation from drawing & specification.
* Requesting NDT, PWHT, hardness, hydro testing as to NDT map, specification, drawing.
* Review RT films for acceptance limits as to current specification.
* Review Post Weld Heat Treatment (PWHT) record chart as to ITP, drawing and specification.
* Request for dimensional survey with client representative (approved inspector- AI) and final dimension.
* Preparing weld history sheets, material traceability, visual reports, NDT reports.
* Approve AS BUILD drawing sign load out as to specification.
* Compile all quality control final reports records and submits to QC/QDC dossiers.
Page 4 of 5
-
CAMEROON SHIPYARD AND INDUSTRIAL ENGINEERING limited SA
- QC Inspector
2006 - 2009
Activities : Rigs, barges refurbishment onshore & offshore, piping etc.
Descriptions : Fabrication main yard QC handling individual projects.
Responsibilities;
* Material inspection
* Material certification are correctly process that is Mill certificates as specification.
* Review drawings general requirements, procedures.
* Inspect welding store for consumable storage includes hold/backing temperatures.
* Monitor fabrication in stages that is before, during and after welding as to drawing, specification, WPS.
* Coordinate with welders and fitter to ensure safe work awareness, good engineering practices, WPS, drawing and specification.
* Raise non-conformance reports (NCR) against production, if any deviation from drawing & specification.
* Request final dimensional survey with client (approved inspector- AI) as to ITP and drawing.
* Approve AS BUILD drawing sign load out as to specification.
* Preparing all quality control final reports records and submit to client (QC/QDC dossiers)
