Menu

Aurélien LANDRIEU

NICE

En résumé

Prosperous in an environment which requires skillfulness, self-sufficiency and capacity to handle technical issues within restrained periods, my experience is a real asset in my daily work. Naturally sociable and autodidact, communication and self-adjustment are for me the baseline for a safe, steady and lasting professional relation.

Mes compétences :
Catia v5
Autocad
Solidworks
Aveva PDMS
Microsoft office
Aveva Reality Review

Entreprises

  • Spirit Technologies - Chargé d’affaires

    2017 - maintenant Hired as Chargé d’Affaire by Spirt Technologies, an engineering support company acting at any step of industrialization issues: complex mechanical development, project management, calculations, tests and manufacturing.

    My mission is to
    - Receive and analyse customer’s tender documents
    - Draft proposal and preliminary design
    - Detailed design
    - Subcontractors and Vendors follow-up
    - Monitor the Assembly and tests activities
    - Final documentation and delivery to the customer

  • Riviera Engineering Consulting - Mechanical Engineer / Freelance consultant

    Nice 2016 - 2017 Business start-up (Limited Liability Sole Proprietorship – EIRL). My mission was to provide technical assistance and mechanical expertise to companies in various engineering lines of business, such as:
    - Water treatment
    - Plastic manufacturing
    - Leisure diving equipment’s

  • Sophia Conseil - Design & Research Engineer

    Sophia Antipolis 2015 - 2015 Hired by Sophia Conseil as Design & Research Engineer, I was allocated to the Mechanical Engineering Office of Cap d'Ail (France-Monaco border). My mission was to provide a technical support for the various Monaco-based customers of Sophia Conseil:

    SINGLE BUOY MOORINGS (SBM Offshore):
    • Technical follow-up of mechanical, pneumatic & hydraulic equipment’s suppliers for the PRELUDE FLNG Turret Mooring System project (Shell/TSC).
    • Monitoring and follow-up of vendor’s technical documentation.
    • Site assistance for the mechanical, pneumatic & hydraulic equipment’s integration & commissioning activities.

    MECAPLAST:
    • Detailed design lead, ensuring manufacturing feasibility and compliance with customer’s esthetics & technical requirements, for the project A4935 (PSA).
    • Detailed design lead, ensuring manufacturing feasibility and compliance with customer’s esthetics & technical requirements, for the project H60B (Nissan).

  • SBM Offshore - Lead Designer/package engineer

    SCHIEDAM 2014 - 2015 Hired by SBM as Package Engineer in the Mechanical Equipment department, awarded to the PRELUDE FLNG TMS project (Shell/TSC).
    SBM Offshore was contracted to engineer, procure, build & install the complete TMS for the FLNG Facility.
    My mission was to:
    • Monitor mechanical/hydraulic/pneumatic design activities.
    • Write technical Specifications in line with project requirements, international codes & standards
    • Manage interfaces with others engineering disciplines (meca, STR, piping, E&I, SLP...)
    • Provide Technical expertise, Bidder's offers management, vendor follow-up
    • Follow-up of Vendor technical documentation.
    • Attend & monitor the Factory Acceptance Tests
    • Provide Site assistance for equipment’s integration & commissioning activities.
    Packages on which I've been involved:
    HPUs, Rotation Tool, Oil Pressurization Systems, Greasing & Locking systems, chemical distribution units, Umbilical Panels, Handling devices (trolley hoists, bridge beams, winches, cranes & others).

  • Sophia Engineering Monaco - Package Engineer

    2013 - 2013 Hired by Sophia Engineering Monaco, in technical support at Single Buoy Moorings (SBM Offshore) offices, as Package Engineer in the Mechanical Equipment department, awarded to the PRELUDE FLNG TMS project.
    SBM Offshore was contracted to engineer, procure, build & install the complete TMS for the FLNG Facility.
    My mission was to:
    • Monitor mechanical/hydraulic/pneumatic design activities.
    • Write technical Specifications in line with project requirements, international codes & standards
    • Manage interfaces with others engineering disciplines (meca, STR, piping, E&I, SLP...)
    • Provide Technical expertise, Bidder's offers management, vendor follow-up
    • Follow-up of Vendor technical documentation.
    • Attend & monitor the Factory Acceptance Tests
    Packages on which I've been involved:
    HPUs, Rotation Tool, Oil Pressurization Systems, Greasing & Locking systems, chemical distribution units, Umbilical Panels, Handling devices (trolley hoists, bridge beams, winches, cranes & others).

  • Sophia Conseil - Mechanical Lead Designer

    Sophia Antipolis 2010 - 2013 Hired by Sophia Conseil (06 - Sophia Antipolis), in technical support at SBM Offshore offices as Lead Designer in the Mechanical Equipment department, mainly awarded to the PRELUDE FLNG TMS project (Shell/TSC). I was also involved as Mechanical Designer on other projects such as QUAD204 (BP), ASGARD (Statoil) and TUPI (Petrobras).

    My mission was to:
    • Manage the design of mechanical, hydraulics & pneumatics packages and ensure manufacturing feasibility & technical compliance with project requirements
    • Issue general arrangement & details drawings
    • Manage the design of Mechanical Equipments on the main 3D model (Aveva PDMS, Navisworks)
    • Lead the Handling Study (responsible for the interface with engineering disciplines, write the handling procedures & philosophy, lifting & travelling devices study report) (Aveva PDMS, Aveva Reality Review)

    Packages on which I've been involved:
    Rotation Tool, Greasing & Locking systems, Umbilical Termination Units & many others.

  • SILVATRIM (WKW) - Package Lead Designer

    2007 - 2010 Silvatrim Group is a leader in thermoplastic profiled and injection molded decorative parts in thermoplastics & composite materials for the automotive industry.
    After my training period & an interim mission I did for the company, I've been hired as project package lead designer.

    Scope of work:
    - preliminary design studies for customers RFQs (catia V5)
    - detailed design lead (catia V5): ensure compliance with project standards and customer's esthetics & technical requirements (environment, mechanical interface, design life, manufacturing feasability..)
    - manage the 3D model life (files exchange with customer, update interface models..)
    - issue detailed & manufacturing drawings (catia v5, AutoCad)
    - study & design of few manufacturing tools (molds, rolling & 3D forming tools, special machinery & others specific production manufacturing tools)
    - study & design of few 3D checking gauges for the Quality Compliance department
    - production follow-up & product evolutions.

    Manufacturing processes well known:
    - Injection molding (precision casting)
    - Bi-material ijection molding
    - Multi-materials plastic extrusion
    - Metal bending/ forming/ rolling
    - Sheet metal deep drawing
    - Cutting/ machining

    Main projects on which I've been involved:
    A51 (Citroën C3 Phase3)
    A55 (Citroën DS3)
    X7 (Citroën C5 Phase3)
    W/S204 (Mercedes Classe C phase4 sedan & break)
    BC95 (Renault Mégane phase 3 hatchback, coupe & estate)
    L538 (Land Rover Evoque 3&5 doors)
    L405 (Range Rover 4th generation)

Formations

Réseau

Annuaire des membres :